Someguy Posted June 12, 2008 Report Share Posted June 12, 2008 i got the ipod kit for my Z2. but the unit doesnt seem to recognize that the ipod is plugged in. the ipod icon, just doesnt light up at all. is there something special i need to do?? Quote Link to post Share on other sites
KillaICM Posted June 13, 2008 Report Share Posted June 13, 2008 make sure you have a good ground and the yellow battery wire is hooked up properly or else it won't power. Quote Link to post Share on other sites
Ecnalb1028 Posted September 6, 2011 Report Share Posted September 6, 2011 so true I had the same problem for a week straight even went and purchase another CD-IB100II believing the first was defective. Granted that you are connected to the 12 v battery constant Ground, ground and groung and only to bare metal. Any metal covered in paint or anything will not be proper ground. THANKS GOODNESS FOR THE VOLTMETER I WAS ABLE TO VERIFY THE VOLTAGE GOING TO THE CD-IB100II. As the book state 14.4 volts. If not ground properly the device will not have enough power for ipod, iphone, etc Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.