Nim Posted June 16, 2008 Report Share Posted June 16, 2008 I'm just trying to find out where to connect the VCC wire to. Also, how does the Avic know I am in reverse? (I don't quite remember a reverse wire when I installed it). THANKS Quote Link to post Share on other sites
antnee Posted June 16, 2008 Report Share Posted June 16, 2008 i think all you need to do is wire the reverse lead wire, then the video in for the camera. then power and ground the camera from the back. Quote Link to post Share on other sites
Nim Posted June 16, 2008 Author Report Share Posted June 16, 2008 OK, I can find my vehicle's reverse wire. Where do I tap this wire into on the Z2? Is there a dedicated wire to connect to for the reverse? Quote Link to post Share on other sites
VBLUE42 Posted June 16, 2008 Report Share Posted June 16, 2008 Yes, Its Purple on the D3 so it may be the same on your unit.. Quote Link to post Share on other sites
CatchMeIfYouCan631 Posted June 16, 2008 Report Share Posted June 16, 2008 it can also be ran to your reverse bulbs if you dont know where the reverse wire is, no?? Quote Link to post Share on other sites
Nim Posted June 16, 2008 Author Report Share Posted June 16, 2008 Yes, that should work too. So this is the info I have gathered so far: 1. Tap into vehicle's reverse wire (or reverse light) with the Z's reverse wire. 2. Connect VCC+ wire to powersupply on the Z. 3. Ground the GND- wire to the Z's main ground wire. 4. Connect the composite cable. Am I incorrect on/missing something? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.