TheRoB305 Posted August 26, 2008 Report Share Posted August 26, 2008 ok bluetooth on my avic f90bt was working perfectly fine for like 2 weeks until one day it just decided to cut off. Connection between my iphone and the unit is perfectly fine. I dial a number, it rings and when the person picks up I hear them for like 2 seconds and then it cuts off and can't hear shit. Blue light is still lit up on the unit showing that it's still connected but you can't hear shit. Anyone experiencing the same issues know of a solution? Please help. Btw I have version 2.0 firmware installed on my iPhone. Thanks in advance. Quote Link to post Share on other sites
datarecl Posted August 26, 2008 Report Share Posted August 26, 2008 ok bluetooth on my avic f90bt was working perfectly fine for like 2 weeks until one day it just decided to cut off. Connection between my iphone and the unit is perfectly fine. I dial a number, it rings and when the person picks up I hear them for like 2 seconds and then it cuts off and can't hear shit. Blue light is still lit up on the unit showing that it's still connected but you can't hear shit. Anyone experiencing the same issues know of a solution? Please help. Btw I have version 2.0 firmware installed on my iPhone. Thanks in advance. Yes, I'm having some of the same issues. I think it's the 2.0 firmware. I've had connectivity issues with a couple of other BT handsfree stuff since i switched to the 2.0 (2.0.1 to be exact). I think the functionality of the F90bt is partially to blame too. And if anyone has a diffrent experience with other devices, please, by all means chime in - but i've found: 1. Incoming calls, once answered on F90bt continue to ring and never allow you to pickup (seems to happen on the first incoming call after connection) - when attempting to answer using phone, disconnects call. 2. Dial by voice/dial by contact/dial by number goes back to source once dialed, then reconnects 2 to 10 seconds later leaving the party called saying "Hello? Hello?" 3. Using any phone function returns you to the Map screen, everytime, regardless of what your previous screen was. 4. Call control (ie hang up/volume buttons) will occasionally never appear. (Completely random) 5. Voice command interface will occasionally never release control to dialer. 6. Recent dial list is never updated. Just to name a few. Quote Link to post Share on other sites
TheRoB305 Posted August 27, 2008 Author Report Share Posted August 27, 2008 i doubt its a problem with iphone firmware 2.0 it was working perfectly fine for like 2 weeks on 2.0 and then it just decided to fuck up one day. i even tryed restoring my iphone and still have the problem. Quote Link to post Share on other sites
syoe Posted January 7, 2009 Report Share Posted January 7, 2009 Did you guys ever get this fixed? Quote Link to post Share on other sites
hagan92 Posted January 8, 2009 Report Share Posted January 8, 2009 Hey, does your system have the updated 2.0 firmware from pioneer? And if it does...make sure you also applied the bluetooth update and reset the system. -Hagan Quote Link to post Share on other sites
Bug Posted January 14, 2009 Report Share Posted January 14, 2009 How about the bluetooth mic gain? I've read about it somewhere but don't quite know how to do it... I have the same problem and the bluetooth update didn't solve it... Did it work with anyone? Quote Link to post Share on other sites
caveman666 Posted January 14, 2009 Report Share Posted January 14, 2009 I have a new unit with 2.0 update and also using an iPhone. I have not experienced any of the problems you list. Don't know if that helps you or makes it worse? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.