jman1113 Posted September 18, 2008 Report Share Posted September 18, 2008 Crewmax for my Z3 please??? Non JBL system. Might be in the vehicles harness at the head unit. I know there's 1 connecter that came out of the back of the stock unit that is not used with the new harness. I think atleast the VSS wire should be there since the stock unit had speed controlled volume. Quote Link to post Share on other sites
MisFit Posted September 19, 2008 Report Share Posted September 19, 2008 Speed Sense white ac radio harness or amplifier under passenger seat Reverse Light blue + passenger kick, 11 pin plug, pin 3 Quote Link to post Share on other sites
jman1113 Posted September 19, 2008 Author Report Share Posted September 19, 2008 By " white ac radio harness" you mean the white wire at the extra unused at the vehicle harness right? Thanks Speed Sense white ac radio harness or amplifier under passenger seat Reverse Light blue + passenger kick, 11 pin plug, pin 3 Quote Link to post Share on other sites
jman1113 Posted September 23, 2008 Author Report Share Posted September 23, 2008 Ok.. Thanks. the light blue was good but there are several white wires in the white unused radio harness.. Quote Link to post Share on other sites
MPTonyT Posted October 17, 2008 Report Share Posted October 17, 2008 ITs the one thats all by itself. There will be one or maybe two what is around some other wires. Should be pin 3 if you dont have JBL and pin 4 if you do. Also Reverse is also found in the 12 pin plug tucked in the headliner which is visible once the over head console is removed. Most people drop the over head console to mount the mic in the factory location so that its hidden and clean. check out the tundra forums there is a complete writeup on an Avic Z2 install. http://www.toyotatundraforum.com/audio-visual/1747-pioneer-avic-z2-nav-install-lots-pics.html Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.