chicagorush Posted October 29, 2008 Report Share Posted October 29, 2008 Hey everyone, I'm having a problem here. I had my N5 hooked up for a while then I went and finally got the CD-SB10 (which was impossible to find anyone who had one). Last night I went to install the CD-SB10 and plugged everything in. I went to start up the car to see if everything works and nothing works except the screen opens up and there is no LCD or any "power". I spliced into the radio's power wire that comes with the head unit and also spliced into the ground. But yet there is no power.... I'm not sure if I unplugged something and can't find it or did I fry something and not know it? But the thing is this has happened to me before when I first installed the head unit and it turned out that the ground wire came off and I redid the ground. But I double checked the ground and all the wires but I still can't seem to find the problem. Any suggestions? I know it has to be getting power one way or another other wise it wouldn't flip open the screen. Thanks Quote Link to post Share on other sites
jocooter Posted November 11, 2008 Report Share Posted November 11, 2008 disconnect all power ( ie battery) for 2 minutes then retry. Quote Link to post Share on other sites
Dane186 Posted November 17, 2008 Report Share Posted November 17, 2008 Hit the reset button, you must reset every time you add a new module. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.