Sveryn Posted December 5, 2008 Report Share Posted December 5, 2008 I bought a used D3 off of Ebay and it didn't include the white RCA connector. I was able to make my own bypass by connecting a single wire to the #1 pin and grounding it. It works fine. I also made a Video out RCA connector by attaching wires to the #21 & #22 pins and soldering each wire to a salvaged RCA plug,Neg-neg, pos-pos, but when I hook it up to the backseat monitor I get nothing. My question is does either the #6 (REAR GROUND) OR #10 (FRONT GROUND) need to be grounded or any other pins need attention to make this work. I know the easy solution is to just buy the connector, but wanted to hook it up for a quick trip. Any help would be appreciated. [/img] Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.