GT3 Posted January 15, 2009 Report Share Posted January 15, 2009 Greetings, Does anyone have experience with the Z1, Z2, or Z3 operation in a car with a stiff suspension? My car is designed for the track, but I use it as a street car, so the suspension is a bit stiffer than a normal sports car. I am wondering if vibration is going to be an issue for the HDD. Thanks in advance! Quote Link to post Share on other sites
gfisher99 Posted January 16, 2009 Report Share Posted January 16, 2009 I have a 2009 Toyota Tacoma X-Runner. The suspension is very stiff and it hasnt been a problem with my Z1. I notice sometimes in the hardware menu it will say "excessive vibration", but it hasnt been a problem. Quote Link to post Share on other sites
DennisOS2 Posted March 29, 2009 Report Share Posted March 29, 2009 I have a 3000GT VR4 with Tein coilovers. I also lowered the car 1 3/4 inches all around (for autocrossing). I do drive the car daily as you so the car occasionally hits the bump-stops, as well. All in all, bone jarring ride as it is designed for the track. Not a problem with the Z1. Z3's have the same basic design ........... just updates to firmware and software. Should not be a problem for you. Quote Link to post Share on other sites
phatron Posted March 30, 2009 Report Share Posted March 30, 2009 I have a lowered Subaru STi....no problems so far. my only complaints are that the z3 completely licks ballz for transfering songs and pictures and it doesnt even have a cool equalizer screen that jams to the beat......ghey! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.