cheetah Posted February 16, 2009 Report Share Posted February 16, 2009 Hello, I just installed Garrett's 60BG Z3 upgrade. But now, when I go to album mode to delete a track, all the boxes are there (such as edit and delete track), but they are greyed out and unavailable. So since I am just starting out, I figured I would do the factory reset of the music library. That didn't work either. Any ideas on how do delete some tracks? Thanks Quote Link to post Share on other sites
garrettoomey Posted February 16, 2009 Report Share Posted February 16, 2009 There are 3 different reset levels. Have you looked in the owner's manual: http://www.pioneerelectronics.com/PUSA/ ... C-Z3?tab=D Quote Link to post Share on other sites
cheetah Posted February 16, 2009 Author Report Share Posted February 16, 2009 Yes, I tried the Method 4, which is to delete the library. I tried it multiple times to no avail. Quote Link to post Share on other sites
garrettoomey Posted February 17, 2009 Report Share Posted February 17, 2009 Method 4 did not delete the library? Quote Link to post Share on other sites
cheetah Posted February 17, 2009 Author Report Share Posted February 17, 2009 Doing method 4 did not bring up the dialog box. Quote Link to post Share on other sites
garrettoomey Posted February 17, 2009 Report Share Posted February 17, 2009 Completely returning the navigation system to the initial state To return the entire navigation system to the default or factory settings, initialize the navigation system in the following order: 1 Press RESET button on the hardware. 2 Initialize the user data area on the hard disk drive. 3 Clear the learned data in the sensor. Steps to follow: 1 Turn the ignition switch off. 2 Press RESET button and hold. 3 Start the engine. After a few moments, the start-up screen comes on for a few seconds. Release the RESET button. 4 Touch and hold MAP button while the start-up screen is displayed. “Clear memory screen†appears. 5 Touch [Clear user information from hard disk]. *This reset operation clears all music data recorded in the music library. Note that the cleared data cannot be restored. 6 Touch [Yes]. The user area in the hard disk drive is initialized. After that, the navigation system restarts. 7 Press MENU button and then touch [settings]. The setting menu appears. 8 Touch [Hardware] and then touch [3D Calibration Status]. 9 Touch [Learning Status] and then touch [Reset All]. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.