Cynical2009 Posted May 26, 2009 Report Share Posted May 26, 2009 I have a 1 ohm factory sub in my Lexus that I want to run directly to my 700BT, is this possible using a cable such as this http://www.radioshack.com/product/index ... Id=2102959 I bypassed the factory amp and replaces both front and rear speakers with aftermarket and ran all new wires as well. Quote Link to post Share on other sites
tnuhn Posted May 27, 2009 Report Share Posted May 27, 2009 if by using that cable plugged into the subwoofer out on the back of the deck then you wont get anything from it as pre-outs are made for sending signal to an amplifier, they do not provide any power. you need an amp, and a new sub at that, Quote Link to post Share on other sites
1loudls Posted May 28, 2009 Report Share Posted May 28, 2009 +1 you will need an amp, if you find the right amp, and you like the factory sub sounds, you can just install a new amp for that sub. 1 ohm stable = not cheap Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.