barnaby2502 Posted July 6, 2009 Report Share Posted July 6, 2009 I have today tried to upgrade my F900 to 2.007 using the firmware on the Pioneer UK website. It seemed to upload fine, but after reboot I am getting a system start up in progress message that seems to hang. I have tried to reset and upload the software again but all to no avail and I am just getting the same message over and over with no functionality available. I have not used any hacks etc previously only having done the previous upgrade since it was installed. Can anyone offer any advice to help me? Quote Link to post Share on other sites
another gsxr 1k Posted July 6, 2009 Report Share Posted July 6, 2009 when the update sems to hang does part of the screen go RED? If so look at the screen and copy the file patch and file name displayed. The is an issue with that file. try copying it to the SD card again. If that fails download the update again and copy the file across. Quote Link to post Share on other sites
barnaby2502 Posted July 6, 2009 Author Report Share Posted July 6, 2009 It seemed to run the update OK and said it was complete and going to reboot. It was when it was rebooted that the problem started. If I put the SD card in now it just seems to ignore it and go to start up and then freezes. Quote Link to post Share on other sites
another gsxr 1k Posted July 7, 2009 Report Share Posted July 7, 2009 Look here, http://www.pioneerelectronics.com/ephox ... Update.pdf Look at step 4,5, and 6. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.