sleffler2309 Posted November 5, 2006 Report Share Posted November 5, 2006 I know that to fix this problem all u need to do it replace some cables and such but i was wondering oif anyone knew hich ones they were considering i have an extra unit at my house and would rather do it myself for free rather the send i tin for 120 bucks!!! Please let me know!!! Quote Link to post Share on other sites
PaisanNYC Posted November 6, 2006 Report Share Posted November 6, 2006 You weren't very descriptive at all in your post. To be able to help you, you need to be specific. Which button failure are you talking about? The knob on the faceplate to change stations? If so, the part # as is CXC4642. Here is a link for that item: [url=http://parts.pioneerelectronics.com/part.asp?productNum=CXC4642]http://parts.pioneerelectronics.com/par ... um=CXC4642[/url] If its some other button, please let me know. As for the blank screen, you might have a cracked flex cable inside. if so the part number for that is GXX1257. (Thank you to AVIC411 member Concept for the part number!) Here is the link to that part: [url=http://parts.pioneerelectronics.com/part.asp?productNum=GXX1257]http://parts.pioneerelectronics.com/par ... um=GXX1257[/url] Below is a diagram how to get to the flex cable in your units so you can do the swap. Remember this is all at your own risk. I, nor this website, assume any responsibility for any damage you may inflict on either of the units. This is merely advice on what may be wrong and the part numbers. [img]http://avic411.com/forum/files/case_removal_130.jpg[/img] Quote Link to post Share on other sites
sleffler2309 Posted November 6, 2006 Author Report Share Posted November 6, 2006 well actually like in the other posts the first button to go was the EQ. Then maybe the angle adjusters and then the ATT, and after that it was all of them, About 3 days latter the screen was blank and all i could do was touch the screen but i couldnt see what i was touching. Any more suggestions?!?!?!?!? Thanks Quote Link to post Share on other sites
PaisanNYC Posted November 6, 2006 Report Share Posted November 6, 2006 all of your buttons went and the screen is blank? Sounds like you have a short on the circuit board! Did you ever check the voltage coming into your unit? It should be around 13.8v ~ 14.0v. Quote Link to post Share on other sites
cntrylvr79 Posted November 6, 2006 Report Share Posted November 6, 2006 With the car running it'll be 13-14 volts with it off it'll be between 11 and 13 depending on the state of the battery. Quote Link to post Share on other sites
sleffler2309 Posted November 6, 2006 Author Report Share Posted November 6, 2006 no its not that and i shouldnt say all the buttons, the volume and eject still worked. I was under the impression it was common and that some people on ebay could fix it, but i do have extra parts and was wondering if i could do it myself!!! Quote Link to post Share on other sites
BigShan1911 Posted November 6, 2006 Report Share Posted November 6, 2006 I don't know if viewing my last post on the same subject will help you out that much considering it sounds like you know what I know .... but just in case, here it is: [url=http://www.avic411.com/forum/viewtopic.php?t=1079]http://www.avic411.com/forum/viewtopic.php?t=1079[/url] I'm sure if you contact "the guy from ebay" he'll tell you how to fix it ...... for $120. :wink: Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.