oddjobbb Posted August 18, 2009 Report Share Posted August 18, 2009 3.0 update bricked my unit how can i revert back to 2.0. Is it even possible to go back. I searched the hacking forum and couldnt find specific direction on how to do it. Quote Link to post Share on other sites
jml2008 Posted August 20, 2009 Report Share Posted August 20, 2009 Is your unit still not working, what happens when you start it up? Quote Link to post Share on other sites
oddjobbb Posted August 20, 2009 Author Report Share Posted August 20, 2009 I found instructions on how to revert back to 2.0 which i have done. I then tried to reinstall 3.0 and it did the same thing, at 3% if stopped loading. I had to revert back to 2.0 again. dont know what to do now my upgrade that i paid for seems to be worthless. Any suggestions? Quote Link to post Share on other sites
another gsxr 1k Posted August 21, 2009 Report Share Posted August 21, 2009 If the SD cards are bad call pioneer. They will be the ones to help. Quote Link to post Share on other sites
Sily_Rabit Posted August 21, 2009 Report Share Posted August 21, 2009 I found instructions on how to revert back to 2.0 which i have done. I then tried to reinstall 3.0 and it did the same thing, at 3% if stopped loading. I had to revert back to 2.0 again. dont know what to do now my upgrade that i paid for seems to be worthless. Any suggestions? I had the same problem. I also reverted to 2.0 and it crashed again at 3%. Here is what I did to fix it. (1) Use the service menu to update wince using the format option. Use the wince files found on SD#2. (2) Get the "My Flash Disk" files from one of the x910bt. See the hack forum for 3.0 hack. (3) Update your unit to 3.0 with x910bt files. (4) Put SD#2 in the unit with the power off. Turn on car. After the splash screen, the official upgrade will install itself. There won't be any input from you, no password or codes, just the white screen similar to SD#1 update. When it is done, it will reboot and you will be at 3.02. Quote Link to post Share on other sites
oddjobbb Posted August 22, 2009 Author Report Share Posted August 22, 2009 I found instructions on how to revert back to 2.0 which i have done. I then tried to reinstall 3.0 and it did the same thing, at 3% if stopped loading. I had to revert back to 2.0 again. dont know what to do now my upgrade that i paid for seems to be worthless. Any suggestions? I had the same problem. I also reverted to 2.0 and it crashed again at 3%. Here is what I did to fix it. (1) Use the service menu to update wince using the format option. Use the wince files found on SD#2. (2) Get the "My Flash Disk" files from one of the x910bt. See the hack forum for 3.0 hack. (3) Update your unit to 3.0 with x910bt files. (4) Put SD#2 in the unit with the power off. Turn on car. After the splash screen, the official upgrade will install itself. There won't be any input from you, no password or codes, just the white screen similar to SD#1 update. When it is done, it will reboot and you will be at 3.02. Thanks for the instructions. i did it the way you said to do it and it worked like a charm. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.