Jump to content
AVIC411.com

Recommended Posts

I'm trying to add a rear camera to my D2 and need to put the cable in it's socket. . I can't figure how to get the unit out. It was installed by CC last year. It has 4 small screws on each side. When I took them out the unit still would not slip out of the case. Thanks.

Link to post
Share on other sites

Pull on the dash bezel. The whole thing will come forward. Then disconnect the 15 or so harnesses plugged into the various switches. Put the truck in gear, then you'll be able to completely remove the dash bezel. Once that's done you'll see 4 7mm bolts holding the avic in. Remove them and your set. Just bypassed a z1 in an 06 superduty today so it's still fresh in my mind.

Link to post
Share on other sites

What I'm trying to do is add a camera to our RV. I'll have a RCA cable coming from the back to the D2. I want the camera on all the time, not just when it's in reverse. The camera is one I got off of Ebay. It has a vedio out rca and power cable. I think I only need to connect this to the yellow video input, or does it go into the rear view camera input? I want to see traffic behind me whild driving.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...