Mr.keel Posted January 21, 2010 Report Share Posted January 21, 2010 I bought a used F700bt off of ebay missing a power harness. So I then bought a power harness for it from a separate buyer. Anyways I now have both of them in my hands and can't get the harness to fit in all the way. It goes over the prongs nicely and slides down a little but won't clip in entirely. It appears to be the correct harness and I am confirming with the seller that it is indeed. When I looked closely at the prongs though none of them appear to be bent but the big prong in the upper right corner is raised slightly higher than the others. Is this why it won't go down all the way or is it manufactured like this? Quote Link to post Share on other sites
Mr.keel Posted January 21, 2010 Author Report Share Posted January 21, 2010 After messing with it for over an hour I found out that I had to pull back on the wiring in order for the prong acceptors in the wiring harness to line up with the prongs properly. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.