austinm22 Posted December 4, 2006 Report Share Posted December 4, 2006 I recently had my Z1 pro installed in my 06 Grand Prix but the installer woudn't do the by-pass so i did it myself the other day. However, now since the bypass the speed sensor works most of the time but every once in awhile it just goes to 0 and sits there for a second and doesn't do anything. I had read that someone said that the pink wire connectors were flaky so i cut them off and redid them and it still does it....Anyone got any ideas? Quote Link to post Share on other sites
cntrylvr79 Posted December 5, 2006 Report Share Posted December 5, 2006 Check and make sure the connection to the vehicle is tight. Also check an make sure the pin for the pink wire is partly pulled out of the harness. Quote Link to post Share on other sites
austinm22 Posted December 7, 2006 Author Report Share Posted December 7, 2006 what do you mean partly pulled out of the harness? Didn't think it was supposed to be Quote Link to post Share on other sites
cntrylvr79 Posted December 7, 2006 Report Share Posted December 7, 2006 I menat to say isn't partly pulled out of the harness. Sorry mind thinks faster than fingers type. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.