hazmater Posted February 14, 2010 Report Share Posted February 14, 2010 HI - I have the Sirius attachment to my Avic 700 and it has worked fine for 10 months. This morning, all appeared normal but there is no sound, just for the Sirius. All other items with the Avic are working fine. Even the Sirius displays normally, (channel info, signal strength, etc.). Any thoughts? thanks in advance. Quote Link to post Share on other sites
hazmater Posted February 16, 2010 Author Report Share Posted February 16, 2010 Update - I disconnected the battery for about 30 seconds and then reatteched it. It's allgood now. Must have reset something. Quote Link to post Share on other sites
jpeepers Posted May 26, 2010 Report Share Posted May 26, 2010 Mine just stopped working today so I'm looking for answers. I'll disconnect the battery when I get home and see if that helps. So sick of this POS radio (D3). My first Sirius reciever died, my backup camera stopped working, my screen freezes when it's cold outside and now this . Quote Link to post Share on other sites
Naylor07 Posted August 1, 2010 Report Share Posted August 1, 2010 Did disconnecting the battery work for you? I have the same issue. I can see all the information, I just don't get any sound through Sirius. I am just thinking about switching to XM, but I want to make sure there isn't any other issues first. Quote Link to post Share on other sites
rockyproc Posted October 11, 2010 Report Share Posted October 11, 2010 I'm having the same issue with Sirius sort of. I installed the cd-sb10 and a scv1 Sirius tuner to my avic z120bt but the volume is very muted with sirius selected. Any other source is fine. If I remove pwr to the scv1 with pwr still on the avic the volume returns to normal but after I turn the car off and return I have the cycle the pwr on the scv1 again. I've tried 2 different scv1 tuners and checked that the ip bus cable is connected properly. Any thoughts? Quote Link to post Share on other sites
JohnnyDepp Posted November 11, 2010 Report Share Posted November 11, 2010 I'm having the same issue with Sirius sort of. I installed the cd-sb10 and a scv1 Sirius tuner to my avic z120bt but the volume is very muted with sirius selected. Any other source is fine. If I remove pwr to the scv1 with pwr still on the avic the volume returns to normal but after I turn the car off and return I have the cycle the pwr on the scv1 again. I've tried 2 different scv1 tuners and checked that the ip bus cable is connected properly. Any thoughts? Make sure you're using a *Sirius* antenna, and not an XM one. Also, make sure you haven't spliced it in any way, and make sure it's mounted in a place with a clear view of the sky, etc. Some good advice about antennas in this thread: http://avic411.com/index.php?/topic/29841-issue-with-xm-receiver-on-pioneer-z120-audio-cuts-out-sometimes/page__p__220832__hl__%2Bsignal+%2Bstrength__fromsearch__1#entry220832 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.