hummer_h3 Posted March 6, 2010 Report Share Posted March 6, 2010 Insalled a new updated hard drive today in the Z1. Everything loaded up ok, and everything worked great. Went to load some customer screens and forgot that I had left a DVD in the machine. Pushed the eject button, makes a lot of noise, but no eject of the DVD. Now, the screen won't go up, and the DVD won't eject. Any way to manually eject the DVD? Hopefully, once ejected it might allow the screen to rise and the system to work again. Quote Link to post Share on other sites
hummer_h3 Posted March 6, 2010 Author Report Share Posted March 6, 2010 IF possible, please delete. I was able to get the disc out with a small pair of needle nose pliers, hit the reset and all is ok. Quote Link to post Share on other sites
CaptainInsaneO Posted March 8, 2010 Report Share Posted March 8, 2010 Did you try to put a new disc in to make sure the drive isn't broken? You shouldn't have to pull them out with pliers Quote Link to post Share on other sites
hummer_h3 Posted March 9, 2010 Author Report Share Posted March 9, 2010 Did you try to put a new disc in to make sure the drive isn't broken? You shouldn't have to pull them out with pliers As a matter of fact, I have recorded two discs to the hard drive since I removed that one disc. I believe it might have warped due to being in their for a long period in the desert heat. I just tossed it when I pulled it so I can't really say it was warped. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.