kingoftypos Posted June 30, 2010 Report Share Posted June 30, 2010 Hello everyone, I am hoping that someone would have this. I would really love to have the pinouts for the I-Bus cable coming from the gexp-920xm module. Basically, I am hooking up my GM XM radio to my Poineer D-3 head unit. I currently have the outputs from the GM xm radio. Which are BN/WH Left audio PU Control Supply Voltage (amp turn on basically) D-GN/WH Right audio TN/WH Shield for audio PK Antenna Enable Signal BARE Drain wire RD/WH 12+ BK/WH ground Thank you for your help. KOT Quote Link to post Share on other sites
steve6534 Posted June 30, 2010 Report Share Posted June 30, 2010 Hello everyone, I am hoping that someone would have this. I would really love to have the pinouts for the I-Bus cable coming from the gexp-920xm module. Basically, I am hooking up my GM XM radio to my Poineer D-3 head unit. I currently have the outputs from the GM xm radio. Which are BN/WH Left audio PU Control Supply Voltage (amp turn on basically) D-GN/WH Right audio TN/WH Shield for audio PK Antenna Enable Signal BARE Drain wire RD/WH 12+ BK/WH ground Thank you for your help. KOT Searching for Pioneer IP Bus pinout brought it right up. Good luck - I imagine the IP Bus control plane is very proprietary ! http://www.hardwarebook.info/Pioneer_IP-Bus Quote Link to post Share on other sites
kingoftypos Posted June 30, 2010 Author Report Share Posted June 30, 2010 Hmmm rather interesting. Thank you very much, and this is one of the reasons why I love my nickname..... I just blame my failures on it. KOT Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.