LexiLexus Posted July 23, 2010 Report Share Posted July 23, 2010 Hi! New user here. I have an AVIC Z1 and I want to delete everything; music library too. I want to also delete any and all software upgrades that have been done on the unit, Gracenote and firmware, too. Can someone tell me step by step how to do this? I want this to go back to the factory setting like it was when it was brand new out of the box. Quote Link to post Share on other sites
CaptainInsaneO Posted July 23, 2010 Report Share Posted July 23, 2010 From the manual: To return the entire navigation system to thedefault or factory settings, initialize the navigation system in the following order: 1 Turn the ignition switch off. 2 Press RESET button. 3 Start the engine. After a few moments, the start-up screen comes on for a few seconds. 4 Touch and hold MAP button while the start-up screen is displayed. “Clear memory screen” appears. 5 Touch [Clear user information from hard disk]. p This reset operation clears all music data recorded in the music library. Note that the cleared data cannot be restored. 6 Touch [Yes]. The user area in the hard disk drive is initialized. After that, the navigation system restarts. 7 Press MENU button and then touch [settings]. The setting menu appears. 8 Touch [Hardware] and then touch [3D Calibration Status]. 9 Touch [Learning Status] and then touch [Reset All]. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.