lowe Posted August 19, 2010 Report Share Posted August 19, 2010 Hey guys. Just installed my X920bt. Looks great so far (except for the presets resetting one time) ... but can't seem to get the steering wheel control working right. Any suggestions or anyone have experience with a 98-02 Accord? Heres what I did: I connected the 3 wires from the SWI-PS unit to... -Grounded Black wire to the dash metal frame. -Red wire was connected to the harness 12v acc power wire (red wire) -Removed the unused orange wire and clip out of the aftermarket harness and placed in back into the harnesses port/slot 3. I then took the white wire from the SWI-PS and connected it to that orange wire that I placed in port 3. I am able to go through the programing instructions easily and everything seems to be going just as the directions say, however, after I finish , the steering wheel controls do not work. Advice guys? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.