jazzzjackrabbit Posted November 20, 2010 Report Share Posted November 20, 2010 without the bypass can you get the backup camera to work while in drive ???? Quote Link to post Share on other sites
VBLUE42 Posted November 20, 2010 Report Share Posted November 20, 2010 Bypass makes no difference and yes, as long as the camera is installed correctly it will display while in drive. Quote Link to post Share on other sites
Jefe21 Posted November 23, 2010 Report Share Posted November 23, 2010 Bypass makes no difference and yes, as long as the camera is installed correctly it will display while in drive. Anyway to get the backup image fullscreen while driving forward? Only get the split screen with nav/cam feed please dont say read the manual please dont say read the manual please dont say read the manual Quote Link to post Share on other sites
VBLUE42 Posted November 23, 2010 Report Share Posted November 23, 2010 No. Quote Link to post Share on other sites
odie Posted November 28, 2010 Report Share Posted November 28, 2010 If you put it in reverse and get a full screen image, why not just put in a toggle switch with 12v going through it to the reverse gear sensor wire.. That way you're tricking the radio into thinking you're going in reverse constantly until you toggle the switch off.. Just an idea.. Odie Quote Link to post Share on other sites
1loudls Posted November 30, 2010 Report Share Posted November 30, 2010 If you put it in reverse and get a full screen image, why not just put in a toggle switch with 12v going through it to the reverse gear sensor wire.. That way you're tricking the radio into thinking you're going in reverse constantly until you toggle the switch off.. Just an idea.. make sure to isolate the wire from the vehicle's computer with a diode or else the reverse lights will be on the whole time the switch is on while the vehicle is driving down the road Quote Link to post Share on other sites
odie Posted December 1, 2010 Report Share Posted December 1, 2010 make sure to isolate the wire from the vehicle's computer with a diode or else the reverse lights will be on the whole time the switch is on while the vehicle is driving down the road I guess what I meant to say is find a switched 12v power source and hook your reverse sensor wire to it, instead of the actual reverse sensor wire. with a toggle switch you can change it from full screen to half screen.. I was also thinking you could install a camera on you front bumper (i.e. a large truck) with a switch to choose between front view and rear view.. Quote Link to post Share on other sites
1loudls Posted December 1, 2010 Report Share Posted December 1, 2010 but then you wold have to manually flip the switch every time you put the car into reverse if you wanted the camera turned on, since it would no longer do it automatically (since its not hook up the the cars reverse wire) it would actually make more sense to have it hooked up to both the factory reverse wire and a switch (if you wanted that functionality bad enough) with a diode to isolate it Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.