jimb726 Posted May 14, 2011 Report Share Posted May 14, 2011 I bought a used 2006 Eddie Bauer Expedition, with Rear DVD and no factory nav. it came with a Avic D3 installed, I had been having problems with it and upon removal it appears that whoever did the install did a very poor job and there are several loose wires that look like they were connected at one time but are no longer. I guess I am looking for 2 things, which wire is the VSS and which is for the reverse signal on the factory harness and if I am not installing a camera, do i even need to worry about the reverse one? Thanks in Advance. Quote Link to post Share on other sites
1loudls Posted August 2, 2011 Report Share Posted August 2, 2011 I guess I am looking for 2 things, which wire is the VSS and which is for the reverse signal on the factory harness those wires are probably not at the factory harness if the factory radio was non-nav and if I am not installing a camera, do i even need to worry about the reverse one? No Quote Link to post Share on other sites
dos0711 Posted August 2, 2011 Report Share Posted August 2, 2011 My 2008 F-150 had a vss sensor wire up to the factory radio since it had speed volume control. Quote Link to post Share on other sites
1loudls Posted August 2, 2011 Report Share Posted August 2, 2011 then he may have luck if his radio had that option Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.