gbodey Posted June 13, 2011 Report Share Posted June 13, 2011 In searching the forum, I have found two answers for the speed signal wire. 1. Is it the white wire in the white connector on the back of the A/C control box 2. Or the white wire on the middle gray connector with silver markings on the wire. Note: there are actually three white wires on the middle gray connector, one has gray marks, one has a black line and one has a green line. This is for the 2005 350Z. Thanks Quote Link to post Share on other sites
MicroSprint5 Posted June 15, 2011 Report Share Posted June 15, 2011 i have a 2003 Z i hooked mine to the white wire on the middle gray connector worked fine for me. Im not sure about the silver markings on mine there was a pink dot every inch or so. Quote Link to post Share on other sites
1loudls Posted August 29, 2011 Report Share Posted August 29, 2011 you should use a DMM to test and verify which wire is the VSS. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.