parissis Posted August 4, 2011 Report Share Posted August 4, 2011 Hi falks, my F900BT was messed up a year ago due to irregular booting, and the only reasonable way to restore was to fully install "FX3.1 Complete Firmware Image by Retell" (post. on Sun May 09, 2010 8:00 am). Now, Pioneer released ver. 4 that I downloaded from the official site (http://www.pioneer.eu/eur/support/software/AVIC-F900BT/index.html), but the system does not recognise the SD card as an update card (starts normally, like the card has nothing in it). Q1: Is it because of the hacked 3.x update, or there's something else wrong? Q2: Is there a way to force the system to read the card as an update card? Thank a lot to AVIC411 and all the guys here, you're helping a lot us rookies! Quote Link to post Share on other sites
bluestreak007 Posted August 4, 2011 Report Share Posted August 4, 2011 4.001 is an update to 4.000, you need to get that first which comes on sd cards from Pioneer. Quote Link to post Share on other sites
parissis Posted August 4, 2011 Author Report Share Posted August 4, 2011 OOPs! Got it. Thank you so much! 4.001 is an update to 4.000, you need to get that first which comes on sd cards from Pioneer. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.