bluestreak007

there is no emulator in CE 6.0 for x86 unlike in CE 5.0

4.001 is an update to 4.000, you need to get that first which comes on sd cards from Pioneer.

finally got everything working I had 2 bad ip-bus cables.

I only had one add on device hooked up at a time. the hd unit has to be the GEX-910HD the 920 doesnt work with the f90. as for the sirius I think the scc1 module is bad. im going to solder some rca's to the sirius unit & hook them up to a direct sound source to confirm my findings, I will post the results.

yeah that didnt work, Sirius still a no go, the hd unit is the gex 920hd I think its because the 910 is for this radio

well I will try that, hopefully it works. thanks, I will post the results.

BTW I also have an iphone 4 & it is working just fine. also the backup cam is working.

So I have the 3.0 update & updated maps for my avic f90bt. I bought the F90bt already updated off of ebay. It came with a Sirius unit, already activated. When I tried the sirius I had no sound out, I thought the cable may be bad, however I got a xm unit & it didnt even show up as a source option, then I got the hd unit & no sound, & the channel doesnt change. Basically everything I hook up to the ipbus doent work. Is this a problem anyone has encountered? do I need to downgrade to 2.0 then update again? or is the ipbus hit?