archieoo7 Posted September 26, 2011 Report Share Posted September 26, 2011 Good morning I'm new to the site but I just bought a z3 and have a couple of questions. I did the yellow and green bypass bit unit still will not work so I have not been able to set time or other functions does it repuire other things please hell Quote Link to post Share on other sites
garrettoomey Posted September 26, 2011 Report Share Posted September 26, 2011 If your bypass is not working, I would suggest that you review the instructions and check your work. If done correctly, it WILL work. If you have not reset your unit since installing the bypass, try pressing the small reset button on the front lower left of the unit. Based on your description above, it sounds like the light green parking brake wire is not grounded properly. Check it first. Quote Link to post Share on other sites
archieoo7 Posted September 26, 2011 Author Report Share Posted September 26, 2011 Thank you ! now thinking i only conected them both to each other ,I did not conect the green wire to anything , What should the green wire be conected to any ground wire . Quote Link to post Share on other sites
garrettoomey Posted September 26, 2011 Report Share Posted September 26, 2011 Yes, any ground should work. You could connect it to the same vehicle wire as the BLACK wire from the back of the Z. Quote Link to post Share on other sites
archieoo7 Posted September 27, 2011 Author Report Share Posted September 27, 2011 Thank you very much ! It works Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.