laurido92 Posted January 7, 2013 Report Share Posted January 7, 2013 Hi all, I just installed a AVH P4400BH unit in my '05 Sequoia and I cannot get the backup camera to show on the screen. I had an AVIC-X930BT and it was working fine. All the connections are the same they were when I had the X930. I tested the connection to make sure. When I place the vehicle in reverse the screen switches and I get the Warning screen but no image appears. I went into the settings and changed the setting to Battery but still cannot get anything. Again, this camera was connected to an AVIC-X930BT yesterday morning and the camera worked fine. Any suggestions will be greatly appreciated. I am looking to do the parking brake bypass but have read that the relay that is sold on ebay may not work anymore. Can anyone verify this. Thanks Quote Link to post Share on other sites
laurido92 Posted January 8, 2013 Author Report Share Posted January 8, 2013 Well after some trouble shooting I found out that I have a bad video cable. Going to buy one tomorrow and install it. Hopefully that solves the problem. Please consider this thread closed. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.