WilliamFMarcus Posted February 27, 2007 Report Share Posted February 27, 2007 Installed a AVIC-N3 into a 2004 Jeep Grand Cherokee. I want to connect the VSS wire. I found a Wire Diagram that stated their should be a white/orange wire in the instrument cluster at pin 4, but no such wire exists. I would like to find a location I can tap off of inside the vehicle so I do not have to go through the Firewall. I do have Cruise Control built into my steering wheel, not sure I can use the wire from there. Thanks for any Information in advanced. Quote Link to post Share on other sites
cntrylvr79 Posted March 1, 2007 Report Share Posted March 1, 2007 To my knowledge the only way you can get vss inside that truck is using a canbus interface. Without that, I'd say you'll be going to a wheel speed sensor for vss. Quote Link to post Share on other sites
WilliamFMarcus Posted March 1, 2007 Author Report Share Posted March 1, 2007 Thanks for the info. Someone on the12volt.com forum directed me to the PCM, Dark Green / Yellow, Pin 27. Installed yesterday and looks to be working great. Going through the firewall in this car wasn't as bad as my other cars were. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.