sna77 Posted June 1, 2006 Report Share Posted June 1, 2006 So.. I didn't do the install so I have no idea how to remove this thing... I popped the plastic face off, and there are 4 tity philips screws... I removed those and tried pulling the unit out, but its definetley in there good... Any idea how this thing comes out? Thanks, Steve Quote Link to post Share on other sites
Guest Posted June 6, 2006 Report Share Posted June 6, 2006 Stealing is bad... Quote Link to post Share on other sites
sna77 Posted June 17, 2006 Author Report Share Posted June 17, 2006 [quote name="Anonymous"]Stealing is bad...[/quote] Ok, so you're an idiot... Anyhow, this is a perfectly legit question, as probably half the people on here may have had their units installed by a shop, as I did. My shop, also would not flip the toggle switch to bypass Pioneer's "safety" features, so I did that part myself... Anyhow, the 4 little screw are really the only thing that holds it in... The unit pulls right out, but its very TIGHT, and needs to be moved back and forth to be removed... BTW, the toggle switch trick works... re-run the light green parking brake ground to anywhere but the parking brake for a ground, and voila! Quote Link to post Share on other sites
chevydudesixty9 Posted June 18, 2006 Report Share Posted June 18, 2006 So you have an N3 and The Parking brake Mod works??? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.