nexus24 Posted April 10, 2007 Report Share Posted April 10, 2007 Just installed my avic-d3 and haven't touched one airbag wire, yet my airbag light still stays on for some reason? Car: 07 VW GTI Quote Link to post Share on other sites
MisFit Posted April 10, 2007 Report Share Posted April 10, 2007 did you unplug anything without disconnecting the battery first? Quote Link to post Share on other sites
tillithz Posted April 10, 2007 Report Share Posted April 10, 2007 short of going to the dealer, try resetting it, battery off for 10 minutes, and or locating the reset/code switch for that system Quote Link to post Share on other sites
WRichieX Posted April 10, 2007 Report Share Posted April 10, 2007 This happened to me too. Dont' know if you have the same problem but here's what my problem was. When I tapped into the vss wire behind the instrument cluster, I didn't plug in a plug in all the way. this also caused my alternator to not get a reading from the ecu which drained my battery. After plugging everything back in, airbag light is off and alternator working perfectly. Try plugging in everything completely that you took off. This was my problem. If it's not yours good luck to you. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.