cpages2 Posted April 30, 2007 Report Share Posted April 30, 2007 So I moved my D2 from my WRX into my new STI just unhooked the harness and plugged into my STI harness. No new cutting or splicing of anythign needed. However when I accelerate I hear a whine cming from the speakers (only if nothign is playing or the volume is low or unit is in standby). I am confised because it sounds liek a ground issue but its the same harness as my WRX and I had no problem there any ideas??? Quote Link to post Share on other sites
Kingof3rdinput Posted April 30, 2007 Report Share Posted April 30, 2007 Yeah, double check the grounds in your STI. It may not be a problem w/ the harness, but w/ the actual ground. Quote Link to post Share on other sites
tillithz Posted April 30, 2007 Report Share Posted April 30, 2007 there is a ground on the side of the factory unit, to the brackets that secure the radio, make sure that is connected as it was before you put the avic in Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.