wlman1959 Posted June 17, 2007 Report Share Posted June 17, 2007 Help, I have a xg350L 2002, I moved the mute wire from its location and installed in new location which was above its oringnal location, i grounded the mute wire with the parking brake wire from avicd3 and black ground wire from avicd3 all together at a good ground, I turned on my unit and reset it, i loaded the east coast disk and let it sink up , my map display showed the west coast map and could locate were i was at , I the removed east coast disk, and reset the unit and installed the west coast disk still no change, I removed the mute wire from ground and reset unit and place the east disk back in, ever thing seems fine the unit now know my location, I am not sure why this is not working, My unit year of make is march 2007, also can anybody help me locate were my VSS is located at also would it hurt to leave the parking brake wire on the ground, I still can not veiw dvd while i am driving over 10mh, also can somebody help me locate were my VSS is located Quote Link to post Share on other sites
MisFit Posted June 18, 2007 Report Share Posted June 18, 2007 you obviously didnt do the bypass correctly. the units always show the west coast when you first initialize the unit. you have to wait a few minutes for it to lock on to the satellites Speed Sense brown data link connector The data link connector is under the steering column. Quote Link to post Share on other sites
wlman1959 Posted June 18, 2007 Author Report Share Posted June 18, 2007 Thnaks I will try it again and give it more time to sink up, and ensure that the mute wire is in correctly, I will let you know how I made out Thanks Quote Link to post Share on other sites
wlman1959 Posted June 19, 2007 Author Report Share Posted June 19, 2007 Thanks a lot the by pass worked Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.