brianas Posted July 5, 2007 Report Share Posted July 5, 2007 need vss wire, reverse wire thanks Quote Link to post Share on other sites
MisFit Posted July 5, 2007 Report Share Posted July 5, 2007 Reverse Light black/pink + driver kick, harness to rear Speed Sense gray/black ac PCM, top plug, pin 1 The PCM is under the hood, next to the brake master cylinder. On diesel vehicles, the VSS wire is in the top plug, pin 22. make sure its not in the radio harness first Quote Link to post Share on other sites
brianas Posted July 5, 2007 Author Report Share Posted July 5, 2007 ok thanks for the info, have you put a dbl din in a ford van yet? thanks Josh Quote Link to post Share on other sites
MisFit Posted July 5, 2007 Report Share Posted July 5, 2007 yeah, i've done a lot of fords Quote Link to post Share on other sites
jimmy303 Posted July 13, 2007 Report Share Posted July 13, 2007 Double-din is not a problem, just make sure you tie everything up behind the dash, the wiring and other behind-the-scenes objects have a tendency to fall out of the dash above the doghouse(motor cover). Noise filters are not meant to be seen OR heard..... Quote Link to post Share on other sites
brianas Posted October 13, 2007 Author Report Share Posted October 13, 2007 forgot to post back on this one, never found the VSS , apparently things changed for wiring for 07 --rev found as posted- thanks the sub dash must be trimmed down on the vans radio opening to fit dbldin also i had to fab brackets to mount the unit- there is no factory brackets or anything in there- its just empty and wide open thanks Josh Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.