sol234 Posted September 1, 2007 Report Share Posted September 1, 2007 sol234 wrote: Hey, I grounded the wire that you suggested to bypass the z1 and now I am getting problems with a buzz noise through my speakers. Do you have any idea what this may be? Have you heard of anyone with this problem. The funny thing is that the buzz noise is constant, but when i open one of my doors I get another noise on top of the buzz noise for about 3 seconds then it goes away, leaving just the buzz noise again. DUB I have never heard of this. You might want to post this in the problem section. But it sounds like a ground problem. Sounds like the grounds for the radio and the bypass are not really good grounds (or one is and the other isn't). Noise like this is usually a grounding problem. I would look into those and post this and see if anyone else has any thoughts. Quote Link to post Share on other sites
sol234 Posted September 1, 2007 Author Report Share Posted September 1, 2007 My backup camera also stop working the same. Can anyone help with this issue? Quote Link to post Share on other sites
whtcrxghst Posted September 1, 2007 Report Share Posted September 1, 2007 Go into the intial/setup menu and turn the camera input on Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.