Steve25 Posted September 30, 2015 Report Share Posted September 30, 2015 I did update of Avic F910 BT from version 2 to version 3, with FIX 3.1, everything works OK but unit "lost" my native (Czech) voice. I can select in menu Czech voice, but navi start speak English. I tried find, in which directory are voices saved, but not finded. Do someone know, where in My Flash Disk (or somewhere else...) I can find these? Quote Link to post Share on other sites
guizmo Posted September 30, 2015 Report Share Posted September 30, 2015 https://drive.google.com/file/d/0B4MAukIOceEXRXU0YUt2TnVYLTQ/view?usp=sharing hi steve decompress this link and put the folder in a sd card with testmode put the sd card in your avic and turn on your avic the windows screen come select total commander and open at the left side storage card and at the right side your flash disk open your flash disk and open apl2 and open igo and open content after this copy my folder voices inside your avic and turn off your avic retire the sd card and restart your avic and select your voice Quote Link to post Share on other sites
Steve25 Posted September 30, 2015 Author Report Share Posted September 30, 2015 Thank you, this I tried with other CZ voices which I use in standard iGO 8.3 (I do business with GPS...) but Pioneer dont want see these. And - I am not sure, if this will change something, becoz actually is this folder empty, inside have only 3 other Czech voices, nothnig more, and navi still speak English... Of course its possible that modified iGo Pioneer version will works with "Pioneer" voices only, which you sent me - I will try at friday in car, and give you info. Anyway thank you so much .-) Quote Link to post Share on other sites
Steve25 Posted October 1, 2015 Author Report Share Posted October 1, 2015 So car comes before few minutes and I must say only one - THANK YOU Works perfect with czech voice like before... Then its 100% sure that these voices are modified with Pioneer, becoz all other iGo czech voices system still not see ( so I deleted these deads....). Great job! Have next, last question for this story. Before upgrade was all menus in czech, after upgrade stay navigation menu in english, all other Pioneer menu (Phone, AV, Media, radio etc.) are in czech. In folder APL2/igo/content/lang have only english-us, frech-can and spanish-mex.zip Yes, here are texts for US version - so - by the way - do you have EU files too? And if yes - what is procedure of changing ? Tried find in menu some language change - nothing. So its direct by SYS.TXT? Becoz in some line was (its from previous backup of system, which I saved in PC, so think now is in voice_key "Voice_Cze-f1"...): [local] voice_key="Eng_us_m1" default_language="english US" Quote Link to post Share on other sites
guizmo Posted October 2, 2015 Report Share Posted October 2, 2015 Hi steve decompress this link put the folder lang on a sd card with testmode https://drive.google.com/file/d/0B4MAukIOceEXT2NoZmJWSEhoN2M/view?usp=sharing do the same you are doing for the voices copy the folder lang inside your avic retire sd card and restart your device Quote Link to post Share on other sites
Steve25 Posted October 2, 2015 Author Report Share Posted October 2, 2015 Works perfect, no more questions. BIG thanks... Quote Link to post Share on other sites
Steve25 Posted October 4, 2015 Author Report Share Posted October 4, 2015 So next one Its not problem, only question. Man asked me, if is possible change default screen from map to radio. He thinked - if he receive phone, then after "some time" display automatically switch to map. Everytime when he start car, everytime display swith to map. Simplay map is like default view of display. And he want have display on "radio". Tried find some "ini" files, but this is not my level of knowledge... Quote Link to post Share on other sites
guizmo Posted October 5, 2015 Report Share Posted October 5, 2015 Hi steve yes it's possible a give you a link take the folder and put him inside a sd card with testmode next and with total commander copy the file (image.res) on apl folder and when avic write replace click on yes https://drive.google.com/file/d/0B4MAukIOceEXYWhHcHJTaEpjT28/view?usp=sharing for the problem of radio i don't see a solution at this time i try to have a solution with this problem with my friends who have a avic wait and see Quote Link to post Share on other sites
Steve25 Posted October 9, 2015 Author Report Share Posted October 9, 2015 OK, I saved and we saw changes of graphics - nice. But its not what he want. I recorded video, so please look what he want. Video start in moment, when he dialed number on his mobile, and on screen is radio. At time 0:06 Pioneer switch automatically display to map, and switch sound to handsfree. At time 0:14 is call ended manually, but on display stay navi, and stay "forever", until he press Radio buton in menu. He want to after every "automatic" work will display be automatically swith back to radio. Understand thats not easy, only wanted better tell you what he want... https://youtu.be/1eMmHvz8Ric Quote Link to post Share on other sites
guizmo Posted October 9, 2015 Report Share Posted October 9, 2015 hi steve in your video i see ok look inside settings for the map display select manually (for the screen map) not automatic (the first choice in list ) Quote Link to post Share on other sites
Steve25 Posted October 22, 2015 Author Report Share Posted October 22, 2015 Car was out for few days, so finally today I tried, but no success In menu I cannot finded any switch for manually/automatic, I tried some, maybe all, other switches, but no success, everytime start call, display switch to map... here are pictures of menu, so pls look, and write in which position is this choice. In my languaze ZAP = ON and VYP = OFF... http://www.czmenu.cz/1.jpg http://www.czmenu.cz/2.jpg http://www.czmenu.cz/3.jpg Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.