Jump to content
AVIC411.com

Can't eject with AVH-W4400NEX


Recommended Posts

I can not for the life of me get my unit to eject. Whenever I press the eject button, it gives me 3 choices that are not greyed out on the left, while the right two choices are greyed out. Whenever I select the CD, SD, or the third button, it does not respond at all. What can I do to fix this???? The unit isn't even a year old, as its build date was May 2018. 

Link to post
Share on other sites
20 minutes ago, asd255 said:

 pressing [EJECT] key and [TRACK UP] key

Oh duh, reading is fundamental.

 

Thanks for the tip, I'll try it out once I get home from work and see if that does the trick. I was able to override the password entry prompt and was able to start fresh with a new password set that I could remember well the next time the battery dies or gets replaced. 

Link to post
Share on other sites

EJECT LOCK MODE for DVD MECHANISM
This model is equipped with an Eject Lock so that it can be shown in stores without worrying about it being stolen.
The Eject Lock can be turned ON/OFF as follows.
Simultaneously press and hold the [HOME] and [EJECT] buttons, and reset the product or turn the ACC ON.
When the Eject Lock is turned ON, the buttons flash yellow.
When the Eject Lock is turned OFF, the buttons flash green.
Wait 35 sec after turning OFF the ACC before turning the +B OFF

 

Link to post
Share on other sites
15 hours ago, asd255 said:

EJECT LOCK MODE for DVD MECHANISM
This model is equipped with an Eject Lock so that it can be shown in stores without worrying about it being stolen.
The Eject Lock can be turned ON/OFF as follows.
Simultaneously press and hold the [HOME] and [EJECT] buttons, and reset the product or turn the ACC ON.
When the Eject Lock is turned ON, the buttons flash yellow.
When the Eject Lock is turned OFF, the buttons flash green.
Wait 35 sec after turning OFF the ACC before turning the +B OFF

 

That worked perfect! Thank you so much! 

Link to post
Share on other sites
  • 2 years later...
  • 1 month later...
On 4/4/2019 at 2:51 AM, asd255 said:

EJECT LOCK MODE for DVD MECHANISM
This model is equipped with an Eject Lock so that it can be shown in stores without worrying about it being stolen.
The Eject Lock can be turned ON/OFF as follows.
Simultaneously press and hold the [HOME] and [EJECT] buttons, and reset the product or turn the ACC ON.
When the Eject Lock is turned ON, the buttons flash yellow.
When the Eject Lock is turned OFF, the buttons flash green.
Wait 35 sec after turning OFF the ACC before turning the +B OFF

 

Hi asd225,

I have an avic-mrz99 the buttons for OPEN and SD card are active but nothing happens when touched, can you help?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...