SPEED 1 Posted December 15, 2007 Report Share Posted December 15, 2007 hey guys I followed the directions from a previous thread on how to connect the 7000tv to the avic-d2 and i get sound but no picture i sent the 12 volts to the av bus but i still get nothing. what should the 7000tv be set as av master, ip-bus,or add on mode. help me please Quote Link to post Share on other sites
mrbombastic Posted December 17, 2007 Report Share Posted December 17, 2007 Mine works fine, set to IP Bus your video output comes from the osd rca going to the D2 AV-Bus, you need to use 3-pin on the AV Bus. Pin 1 = Video Ground Pin 2 = Composite Input from OSD RCA Connector center pin. Pin 12 = AV ON INPUT needs to go to +12V. The 12V input tells the AVIC to turn on the AV-Bus input. Quote Link to post Share on other sites
SPEED 1 Posted December 18, 2007 Author Report Share Posted December 18, 2007 I connected everthing the way you did and my av-bus must not be coming on, all I get on the screen is the channels and the tv station's audio. When you cut the av-bus cable in half what did you do with the silver wiring that's all around the entire wiring, isn't that like a ground or something? I get no picture on my d2 but when I connect the osd from the 7000tv to the headrest monitor I get a picture. Are there different av-bus cables? The one I got has the correct pin count and it plugs right into the d2, and also if I'm getting sound and a picture on the headrest monitor that means that the 7000tv is hooked up correctly wouldn't you think Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.