If someone is having problems installing the Igo8 just pm me and i'll be glad to help....

GUGA

Thanks for your help;

I havw AVIC-F500 and i want to add some maps to the native navigation software of the avic, So How can i add addetional maps file?

I have SW version 2.006000

Regards;

All you have to do is download the new maps, download testmode 2.3. Then unzip content of testmode to sd card and copy over maps. Then when testmode starts up, go into file manager and delete the maps from the apl2 folder. Don't forget to do a full backup first. The directories you need to delete and copy over is map dem and poi. I have it working just fine on mine.

Sorry for the questions, I'm kinda new to this. Do I put the entire launcher folder into the root of the SD, or do I mover all the sub-folders in the root individually?

 

 

Your SD Card should contain the following:

 

\Storage Card\

->voices

->TomTom

->Testmode

->iGo8

Hi Leet; Appreciating your great Job

When i start iGO the screen freez on "INITIALIZING WARNING DATA"

Please advice

i was read 53 pages but i havent find my questin ; I have 900 bt and SW 1.006 , can i use it directly? or firstly must to upgrade SW 2.0 after than 3.0 ?

Can i put on my 900BT SW 1.006 IGO 8 ?

Thans advance

Hi everybody…

I'm Italian and i have bought yesterday one F900BT, i'm trying to install TomTom with LeetLauncher… but i read any singular line of this procedure, but when i put my SD in doesn't happen…

The Radio read the mp3 files on it but no Leetlauncher installation…

My SD card content:

SDCARS/LeetLauncher

SDCARS/Testmode

SDCARS/TomTom

SDCARS/voices

SDCARS/iGo8

SDCARS/gpslog

SDCARS/Garmin

SDCARS/Application Data

no others file…

i turn on the radio, i wait until is boot… i put the SD in… the radio start play my mp3 on the root of the SD

i turn off the radio… i turn on with the SD in… nothing happened…

the radio start playing my mpr on SD root…

Sorry but i'm a new user and i don't know where is the mistake…

I need to to something first before installing LeetLauncher??

please help me soon…

Thanks everybody!!

lucaspeedy,

You need to copy some files from Testmode 2.3's testmode folder into LeetLauncher 3.0's testmode folder for it to wok with the latest releases of the AVIC firmware. Copy all the 0-length files without an extension (they are named like "45487613469745412354668745684665", etc) from Testmode 2.3's "testmode" folder into the LeetLauncher 3.0's "testmode" folder and it should boot. These files are like keys the firmware looks for before it will let you enter testmode.

lucaspeedy,

 

You need to copy some files from Testmode 2.3's testmode folder into LeetLauncher 3.0's testmode folder for it to wok with the latest releases of the AVIC firmware. Copy all the 0-length files without an extension (they are named like "45487613469745412354668745684665", etc) from Testmode 2.3's "testmode" folder into the LeetLauncher 3.0's "testmode" folder and it should boot. These files are like keys the firmware looks for before it will let you enter testmode.

Thanks a lot!!

Now it goes kindly!!!!

Only one question too…

Can i have my standard noot radio with only an icon to make TomTom or IGo start from the main menu of the pioneer, without the leetlauncher interface?? i see some picture in this forum that the main menu of the avic has three icon with tomtom, igo, testmode… How can i do this??

Hi everybody, my first post here, i full read the 54 pages so.... in first place CONGRATULATIONS LEET for this EXCELENT program, i recently installed so im start to use an test it.

In second place.. i have a F90BT with 2.006 version and i have several problems to make leet works.... so after read all this pages i try with the solution above and works everithing OK

Re: LeetLauncher v3.0!!!

Postby syb0rz on Wed Jul 15, 2009 11:26 pm

Yea, LeetLauncher 3.0 works fine with the newest WinCE and 3.010 firmware. Here's how to fix the autolaunch problem:

1) Download LeetLauncher here: viewtopic.php?f=34&t=18522#p123463

2) Download TESTMODE 2.3 here: viewtopic.php?f=34&t=25367#p172474

3) Delete ALL files in Leet's testmode folder and replace them with the Testmode 2.3 files

4) Open CopyTool.mscr in notpad and erase all the text (optional, but makes it much faster)

5) Add this code to CopyTool.mscr and save:

Code: Select all

Run(SystemPath("ScriptPath")\"..\LeetLauncher\LeetLauncher.exe")

syb0rz

Posts: 6

Joined: Tue Feb 17, 2009 9:14 pm

So Again thanks to leet and to all off you, this forum its very great, im try to participate active, and make my contribution to leet. My name is Javier and i live in Uruguay - South America !!!

Best regards,

How can i get my Unit ID for the Garmin XT, cause i see on the folder garmin and open the GarminDevice.xml and i use a key generator but doesnt work, anybody can help me to activate the garmin gps ??

Thanks very much

Javier

PS if something needs i have complete maps for garmin for Argentina, Uruguay and Chile

I now have Garmin XT running on my F500BT under LeetLauncher ! - The problems I'm having are as follows:

 

* There's no audio in Garmin XT even though there is audio in Corel and Igo8.

* Garmin XT doesn't save any new settings. After I leave the XT program, I have to set it up again when I re-start. Also - Upon exiting XT, The unit goes back to a blue windowsCE screen instead of LeetLauncher.

 

Any suggestions would be appreciated - Thanks !

I have the same problem too, garmin doesnt save any settings

Thanks,

Javier

I have problem with Garmin XT on my F500BT. It crashes every time when I click any icons under "Points of Interest".

Anybody have the same experience?

Am I correct in understanding that I can launch other windows CE applications on top of the AVIC using leetlauncher?

Has anyone found any updates on the USB input?

The only thing I really want is to put my radar detector into the screen of the AVIC like guys with carputers do with the valentine 1 windows app.

Hi all!!

My name is ivan and I'm italian.

i've bought an avic f900bt and i follow the leetlauncher's guide and it works fine, but i have a problem with tom tom application.

I put the map in the folder "tom tom " of the sd (the map is italia V845.2666 )then i activate the map but, the program still not work, it will display " no maps found".

anyone would keep me a hand?

thanks a lot and sorry for a bad english

lucaspeedy,

You need to copy some files from Testmode 2.3's testmode folder into LeetLauncher 3.0's testmode folder for it to wok with the latest releases of the AVIC firmware. Copy all the 0-length files without an extension (they are named like "45487613469745412354668745684665", etc) from Testmode 2.3's "testmode" folder into the LeetLauncher 3.0's "testmode" folder and it should boot. These files are like keys the firmware looks for before it will let you enter testmode.

Hello everyone

I have don this but my F900BT (Europa/ Netherland) hold with the leetlauncher display and the message "system is starting up. Please wait ...." And I am waiting and waiting but after 90 minutes I believe this is not good.

What can I do??

I have make the SD card again (after format)

I have start up many times?

I have the same problem with and without any maps. But I have also don it with maps (MIO en TT)

I have the 3.002.00 firmware on the system

I have download leetlauncher again (version 3.00)

he start with the time 12:00 Am after a little time he set the time to 06:06or something else.

Please... help.

Thanks

Ron

update:

I have done a reset (pin left corner with the SD card in slot)

I have a error

Could'n copy '\storage card\leetlauncher\script\leetmenu.exe' to 'my flash disk\apl\leetmenu

Line 4 (\storage card\leetlauncher\script\startmenu.mscr): copy ("\storage card\leetlauncher\scripts\leetmenu.exe", "\my flasdisk\apl\leetmenu", TRUE)

I don't no this is helping to fix my problem but.... I hope so.

Thanks a lot

Rob.

========================

Update

========================

After the change earlier in this 55 pages I have change the copytool.mscr whit (but also only)

Run(SystemPath("ScriptPath")\"..\LeetLauncher\LeetLauncher.exe")

But now I have the message:

Variable reference is empty.

Line 2 (\storage Card\Testmode\copy Tool.mscr):

run(systemPath("scriptPath")\"..LeethLauncher.exe")

}/quote}

I don't understand this. I am good in computer hardware but software .....

Please help me. I wanted also TT on my Pioneer FB90 BT Europe

Thanks again.

Mistake it is a part from message here at the top

Delete this one. So it is one story

In most programming languages a single '\' in between two double quotes in a string declaration usually means you're using a control character (like being "\t", for example). Try escaping the "\"s in the command string (notice I left the first "\" that's outside the double quotes alone):

run(SystemPath("ScriptPath")\"..\\LeetLauncher\\LeetLauncher.exe")

In most programming languages a single '\' in between two double quotes in a string declaration usually means you're using a control character (like being "\t", for example). Try escaping the "\"s in the command string (notice I left the first "\" that's outside the double quotes alone):

run(SystemPath("ScriptPath")\"..\\LeetLauncher\\LeetLauncher.exe")

Thanks a lot a look for it but I did't make it self it is a copy from:

viewtopic.php?f=64&t=18522&start=795#p206988

I will also try first to install the original update from pioneer.

I have only update it from here viewtopic.php?f=34&t=29761 My be there is also a problem with this.

I hope so for a solution. TomTom is so much better for my use.

Rob

16/mrt 11:15 uur

It is working !!!!

After the (original) Pioneer update he has update windows Ce with one version on the end x.xx.xxx.3 and Leetlauncher works!!

Magnificent.

Now I have the problem no maps found (i put them in the TT folder) but that I am looking for. Also the same problem with a Igi8 .

Thanks a lot for so far

I hope also when he is working TT is fast and I can put al my POI's (1000 +/-) with Europ mobilhomeplaces e.g. on my system.

================================================

The problems that I have now:

- TomTom "no maps found" (I have try different maps but he don't foud it. Where have I put them

I have set the maps in TT directory in a map Benelux or Europe

- IGO he give after startup "initializing warning data" and hang-up the complete system

+++is fixed. Have another content map copied and deleted de "old"one.

- how can I use the radio

Thanks again

Ron (the Netherlands)

has anyone seen this video on YouTube about leetlauncehr? Is it this far along here on this forum. This looks very cool.

Holly shit that looks nice. As far as I am aware though, he is no longer in development on this. PM him and see if he responds.

16/mrt 11:15 uur

It is working !!!!

After the (original) Pioneer update he has update windows Ce with one version on the end x.xx.xxx.3 and Leetlauncher works!!

Magnificent.

 

Now I have the problem no maps found (i put them in the TT folder) but that I am looking for. Also the same problem with a Igi8 .

 

Thanks a lot for so far

I hope also when he is working TT is fast and I can put al my POI's (1000 +/-) with Europ mobilhomeplaces e.g. on my system.

 

================================================

 

The problems that I have now:

 

- TomTom "no maps found" (I have try different maps but he don't foud it. Where have I put them

I have set the maps in TT directory in a map Benelux or Europe

 

- IGO he give after startup "initializing warning data" and hang-up the complete system

+++is fixed. Have another content map copied and deleted de "old"one.

 

- how can I use the radio

 

Thanks again

Ron (the Netherlands)

I have the same problem

[quote="knorrr"

The problems that I have now]

===================================================

After reading 55 pages I believe that the radio is not working it is "normal"

But how can I put maps in the TT file?

Have nobody a solution?? PLEASE (not only for my I have read )

Thanks for the answers

Ron

===================================================

After reading 55 pages I believe that the radio is not working it is "normal"

But how can I put maps in the TT file?

 

Have nobody a solution?? PLEASE (not only for my I have read )

 

Thanks for the answers

Ron

Sorry Ron, but until we get the APL DLLs figured out we can't tell the uCOM device on the AV board to change the audio source from the Navi sources (SD & USB) to other sources like the Radio, IPBus, iPod or AV1/2. I'm not sure if Leet got around to that, and none of us have his source to make modifications ourselves.

This has been a download that I have always been reluctant to try because he has left the forum and this mod has been up before the 3.0 update without any changes. I think that I pm'd him about six months ago and did not get a response, actually, the PM wasn't even read

Hi avic411 people, sorry I've been away from the scene. Been extremely busy with work and have absolutely no time at all to work on this project. Another bad news is that someone broke into my car and stole my F900BT so now I don't think I will ever continue with this development anymore. To those that pm me, sorry that I didn't reply to you. I don't want to be a jerk, but I just don't have the time anymore. Consider the development of the leetlauncher over for now.

For all developers that want to continue development on this deck and need help, you can always try to AIM me at BKnight209. If I don't answer, that means that I am away, just leave a detail message and I will try to respond to you when I am available. I'll try to point you in the right direction.

If I ever decide to get a new deck, I might start a new project for whatever deck I am going to get in the future. I will most likely stay within the pioneer community.

Thank you for all your support.