thanks, i'll try that, i'm working on uploading the part 13 on rapidshare, once i've uploaded it can anyone post it somewhere's as a whole file cause my internet is just freakin slow

 

Thanks!

still no luck uploading the part 13, ill, try the ftp site,

still no luck uploading the part 13, ill, try the ftp site,

You could try megaupload.com or depositfiles.com... They tend to work a bit better...

thi is what i got from the address you gave me

i think i have old 3dc and 3dl files

I get 8.0 maps from here:

http://turtrek.googlepages.com/countries2008:voorigo8

 

this license installed:

• Asbis_PNA_EEU@0807_(NNG+TA,_WEUMRE)_ASBISGPS450.lic
  Becker_Z201_EuRus@08Q2_(NQ)_#3_Ermine_II.lic
  

[email protected]
iGO8_PDA_PNA.lic
iGO2008.lic
LCP_43J_FEU@0807_(NNG+TA_HUN_TMC).lic
Maestro_PNA_NA@08Q2_(NQ)_2008-08-22.lic
Ngai_Lik_PNA_FEU@0804_(TA_only,_3DLM)_ORION_NVX200L43.lic
PearlAgency PNA [email protected]
WorldWide_v142_Demo_2008_02_01.lic
Asbis_PNA_EEU0807_NNG_TA_WEUMRE_ASBISGPS450.lic

 

Are there Problems if too many licenses are installed?

 

No, too many licenses should not be a problem...

 

I would think if one map works, others from the same set should work as well...

Thx a lot BorisM.

I think i delete/lost original License? I can´t remember the name of the original-license-file. Can anyone send me a copy of a EW license file please? [email protected]

My F900BT don´t play music now, and show device starting info all time.

thx.

thi is what i got from the address you gave me

 

 

i think i have old 3dc and 3dl files

Were the crums in the zip file too?

thi is what i got from the address you gave me

 

 

i think i have old 3dc and 3dl files

Looks like either no (active) 3DC files, or you do not have buildings turned on at all... If everything works, it should look like N-S-E-W's pictures (about the same area, too)...

Here's the same location on my unit.

thi is what i got from the address you gave me

 

 

i think i have old 3dc and 3dl files

so those ones showing are just landmarks? damn,

Were the crums in the zip file too?

BRILLIANT, that's made me laugh.............

............still laughin....................

now this is bugging me, as far as i know i have the hacked ezrider and the enable_buildings=1 in my system text, now why is it that i don't have 3d buildings? i have all 3dc and 3dl files but buildings still wont show up,

hey borism, mind helping me out here, could you post your hacked ezrider here as well as the 3dc and 3dl file of chicago, just want to compare it with mine

N-S-E-W

could you go to this destination and post a picture of it,

Canada, manitoba, winnipeg, 350 main,

thanks in advance

now this is bugging me, as far as i know i have the hacked ezrider and the enable_buildings=1 in my system text, now why is it that i don't have 3d buildings? i have all 3dc and 3dl files but buildings still wont show up,

 

hey borism, mind helping me out here, could you post your hacked ezrider here as well as the 3dc and 3dl file of chicago, just want to compare it with mine

 

N-S-E-W

could you go to this destination and post a picture of it,

Canada, manitoba, winnipeg, 350 main,

 

thanks in advance

Nothing showed up there on my unit. I went to downtown Montreal and saw about a dozen buildings. Wasn't sure at first if they were landmarks or buildings so I turned off the landmarks in the settings and they still showed. It appears the version I have does not have buildings or landmarks for downtown Winnipeg. The size of my 3dc file is 4.84mb. Not too large for all of Canada considering California alone is a bit over 2mb.

You probably should be asking yourself whether it's worth it to pursue it if most of time is spent in Winnipeg.

now this is bugging me, as far as i know i have the hacked ezrider and the enable_buildings=1 in my system text, now why is it that i don't have 3d buildings? i have all 3dc and 3dl files but buildings still wont show up,

 

hey borism, mind helping me out here, could you post your hacked ezrider here as well as the 3dc and 3dl file of chicago, just want to compare it with mine

 

N-S-E-W

could you go to this destination and post a picture of it,

Canada, manitoba, winnipeg, 350 main,

 

thanks in advance

 

Nothing showed up there on my unit. I went to downtown Montreal and saw about a dozen buildings. Wasn't sure at first if they were landmarks or buildings so I turned off the landmarks in the settings and they still showed. It appears the version I have does not have buildings or landmarks for downtown Winnipeg. The size of my 3dc file is 4.84mb. Not too large for all of Canada considering California alone is a bit over 2mb.

 

You probably should be asking yourself whether it's worth it to pursue it if most of time is spent in Winnipeg.

my 3dc file are of the same size, guess there's really nothing here, damn, would you mind posting your ezrider.exe, i just want to compare it with mine, and also, do you know how many kinds of hacked ezrider there are, i remember when i first started looking for the hacked one i saw a couple of different sizes, i tried using the stock one and did not recognize any of the maps so i guess it's hacked cause my maps are 2008.04

thanks again in advance

The license and ezrider I'm using is from here:

http://rapidshare.de/files/40903102/ir.zip.html

now this is bugging me, as far as i know i have the hacked ezrider and the enable_buildings=1 in my system text, now why is it that i don't have 3d buildings? i have all 3dc and 3dl files but buildings still wont show up,

 

hey borism, mind helping me out here, could you post your hacked ezrider here as well as the 3dc and 3dl file of chicago, just want to compare it with mine

 

N-S-E-W

could you go to this destination and post a picture of it,

Canada, manitoba, winnipeg, 350 main,

 

thanks in advance

N-S-E-W already posted the link... AFAIK there is only one hacked EZRider (since it was made once by one person). Not every license file works for buildings, though. I've posted an archive with a couple dozen of them somewhere here recently, and at least one of them works...

First timer and I have a question. I upgraded my maps with no problem(Avic-F500BT). I loaded the hacked version of ezrider, then loaded the 2008.01 US maps from this forum (which had the fbl, 3dl, 3dc and poi files sprinkled throughout) and seperated out the .3dl, 3dc into the "BUILDING" folder, the maps in the "MAP" folder and the poi's in the "POI" folder. Everything loaded fine but when you search for POI's nothing comes up. Did i do something wrong? Do i have to edit another file? Your help is greatly appreciated.

Erik

Edit: when i reload my backup poi's they work as intended.

now this is bugging me, as far as i know i have the hacked ezrider and the enable_buildings=1 in my system text, now why is it that i don't have 3d buildings? i have all 3dc and 3dl files but buildings still wont show up,

 

hey borism, mind helping me out here, could you post your hacked ezrider here as well as the 3dc and 3dl file of chicago, just want to compare it with mine

 

N-S-E-W

could you go to this destination and post a picture of it,

Canada, manitoba, winnipeg, 350 main,

 

thanks in advance

 

 

 

N-S-E-W already posted the link... AFAIK there is only one hacked EZRider (since it was made once by one person). Not every license file works for buildings, though. I've posted an archive with a couple dozen of them somewhere here recently, and at least one of them works...

now i'm going nuts, i have the same ezrider from the download, i have the worldwide license, what the hell is wrong, kinda getting annoyed, any clue?

hey borism, can you post your Data.zip, license, ezrider and sys.txt, i just want to see if its because of my mods or my unit, damn i'm getting all frustrated

I got the 2008.04 maps downloaded. Now I just have to load them and see if they work. Fingers crossed : )

finally got it working, i read through some previous articles regarding the buildings and came across this

Mine had a problem with the worldwide license. J

 

Just yesterday I figured I'd try the license that was contained in the ir.zip from this download.

http://rapidshare.de/files/40903102/ir.zip.html

 

This link can be found in this thread: http://www.avic411.com/forum/viewtopic.php?t=19346

 

I now have buildings show on my unit as well as the pre-loaded landmarks. I simulated a route through downtown Chicago and there was literally hundreds of buildings showing. With that type of density of buildings showing, the button presses were noticeably slower to take effect. In a couple cases during simulation the the sheme turned to a all black background. Probably due to the speed of the simulation where the processor could not draw the image fast enough to keep.

thanks to everyone that helped, finally got everything sorted out

finally got it working, i read through some previous articles regarding the buildings and came across this

 

Mine had a problem with the worldwide license. J

 

Just yesterday I figured I'd try the license that was contained in the ir.zip from this download.

http://rapidshare.de/files/40903102/ir.zip.html

 

This link can be found in this thread: http://www.avic411.com/forum/viewtopic.php?t=19346

 

I now have buildings show on my unit as well as the pre-loaded landmarks. I simulated a route through downtown Chicago and there was literally hundreds of buildings showing. With that type of density of buildings showing, the button presses were noticeably slower to take effect. In a couple cases during simulation the the sheme turned to a all black background. Probably due to the speed of the simulation where the processor could not draw the image fast enough to keep.

 

thanks to everyone that helped, finally got everything sorted out

Glad you got it working. The EZRider is the same as was posted here, licenses I did post, and my DATA.ZIP is in the progress report thread. Besides, I am up to my attachment allotment here anyway

finally got it working, i read through some previous articles regarding the buildings and came across this

 

Mine had a problem with the worldwide license. J

 

Just yesterday I figured I'd try the license that was contained in the ir.zip from this download.

http://rapidshare.de/files/40903102/ir.zip.html

 

This link can be found in this thread: http://www.avic411.com/forum/viewtopic.php?t=19346

 

I now have buildings show on my unit as well as the pre-loaded landmarks. I simulated a route through downtown Chicago and there was literally hundreds of buildings showing. With that type of density of buildings showing, the button presses were noticeably slower to take effect. In a couple cases during simulation the the sheme turned to a all black background. Probably due to the speed of the simulation where the processor could not draw the image fast enough to keep.

 

thanks to everyone that helped, finally got everything sorted out

 

Glad you got it working. The EZRider is the same as was posted here, licenses I did post, and my DATA.ZIP is in the progress report thread. Besides, I am up to my attachment allotment here anyway

thanks a lot for the help

thanks, i'll try that, i'm working on uploading the part 13 on rapidshare, once i've uploaded it can anyone post it somewhere's as a whole file cause my internet is just freakin slow

 

Thanks!

 

still no luck uploading the part 13, ill, try the ftp site,

Any luck uploading part 13 anywhere?

Thanks,

Lee

thanks, i'll try that, i'm working on uploading the part 13 on rapidshare, once i've uploaded it can anyone post it somewhere's as a whole file cause my internet is just freakin slow

 

Thanks!

 

still no luck uploading the part 13, ill, try the ftp site,

 

Any luck uploading part 13 anywhere?

 

Thanks,

Lee

search here http://turtrek.googlepages.com/countries2008:voorigo8

i checked a couple of files there and they are all 2008.04, still no luck with the upload

finally got it working, i read through some previous articles regarding the buildings and came across this

 

Mine had a problem with the worldwide license. J

 

Just yesterday I figured I'd try the license that was contained in the ir.zip from this download.

http://rapidshare.de/files/40903102/ir.zip.html

 

This link can be found in this thread: http://www.avic411.com/forum/viewtopic.php?t=19346

 

I now have buildings show on my unit as well as the pre-loaded landmarks. I simulated a route through downtown Chicago and there was literally hundreds of buildings showing. With that type of density of buildings showing, the button presses were noticeably slower to take effect. In a couple cases during simulation the the sheme turned to a all black background. Probably due to the speed of the simulation where the processor could not draw the image fast enough to keep.

 

thanks to everyone that helped, finally got everything sorted out

Well, what kind of buildings did you find in Winnipeg?

finally got it working, i read through some previous articles regarding the buildings and came across this

 

Mine had a problem with the worldwide license. J

 

Just yesterday I figured I'd try the license that was contained in the ir.zip from this download.

http://rapidshare.de/files/40903102/ir.zip.html

 

This link can be found in this thread: http://www.avic411.com/forum/viewtopic.php?t=19346

 

I now have buildings show on my unit as well as the pre-loaded landmarks. I simulated a route through downtown Chicago and there was literally hundreds of buildings showing. With that type of density of buildings showing, the button presses were noticeably slower to take effect. In a couple cases during simulation the the sheme turned to a all black background. Probably due to the speed of the simulation where the processor could not draw the image fast enough to keep.

 

thanks to everyone that helped, finally got everything sorted out

 

Well, what kind of buildings did you find in Winnipeg?

well i believed when you said there's nothing here, just wanted it to work, thanks for the help