I have noticed that as well that the trip computer does not always start. It did the same thing with no mods at all, so I am thinking that there is a glitch in the Pioneer OS for this to happen and not the mod itself.

One thing IDT if you can. I noticed that the street numbers are always odd on the left side and even on the right side of the screen. On a prior mod that I had, the street numbers were shown on the correct side of the street. For example if you are heading south the odds are on the right side and the evens on the left. If you head north on the same street the numbers reverse to show the correct numbers on the correct side of the street.

I love the trip computer but can it be visible when you are navigating as well as just driving around? Just a thought.

Thanks for all you do.....I owe you alot of beer money right now....It may turn into a keg!!!!

Regards,

just press the 'your speed' box and the trip computer comes up on the left side of the screen.

I know this sound output thing is apparently F500BT specific, but I notice the "exceeding speed limit" warning audio does indeed mute the HU and annouce over the speakers. Why does this announce correctly, but the "red light camera" warnings do not. They still only announce on the avic itself, forcing me to leave the audio output to "both" and still cant be heard over even moderate volume HU music.

PLEASE HELP WITH THIS. The routing of the audio output must be adjustable via code..

I love this friggin IDT interface, looks like I have to pay for this 3.0v3 upgrade also...

Thanks maddog hoek for getting back to me. I am aware of what you said. However, when following a route there is no speed limit sign on my display and with the turn info on the left side of the screen it appears that there would not be enough room anyhow.

Regards,

One thing IDT if you can. I noticed that the street numbers are always odd on the left side and even on the right side of the screen. On a prior mod that I had, the street numbers were shown on the correct side of the street. For example if you are heading south the odds are on the right side and the evens on the left. If you head north on the same street the numbers reverse to show the correct numbers on the correct side of the street.

 

Get into your Navigatemap_800_480.ui file and change this:

;house numbers display 

To this:

;house numbers display 

And it will straightenit out.

Had to do it to mine too.

Bud

One thing IDT if you can. I noticed that the street numbers are always odd on the left side and even on the right side of the screen. On a prior mod that I had, the street numbers were shown on the correct side of the street. For example if you are heading south the odds are on the right side and the evens on the left. If you head north on the same street the numbers reverse to show the correct numbers on the correct side of the street.

 

Get into your Navigatemap_800_480.ui file and change this:

;house numbers display 

 

To this:

;house numbers display 

 

And it will straightenit out.

Had to do it to mine too.

Bud

so i got it on the wrong side? i'll check it out

I know this sound output thing is apparently F500BT specific, but I notice the "exceeding speed limit" warning audio does indeed mute the HU and annouce over the speakers. Why does this announce correctly, but the "red light camera" warnings do not. They still only announce on the avic itself, forcing me to leave the audio output to "both" and still cant be heard over even moderate volume HU music.

 

PLEASE HELP WITH THIS. The routing of the audio output must be adjustable via code..

 

I love this friggin IDT interface, looks like I have to pay for this 3.0v3 upgrade also...

one question,did you change the device type of your sys.txt to the one specific to F500?

.

thanks for the donation bro

I have noticed that as well that the trip computer does not always start. It did the same thing with no mods at all, so I am thinking that there is a glitch in the Pioneer OS for this to happen and not the mod itself.

 

One thing IDT if you can. I noticed that the street numbers are always odd on the left side and even on the right side of the screen. On a prior mod that I had, the street numbers were shown on the correct side of the street. For example if you are heading south the odds are on the right side and the evens on the left. If you head north on the same street the numbers reverse to show the correct numbers on the correct side of the street.

 

I love the trip computer but can it be visible when you are navigating as well as just driving around? Just a thought.

 

Thanks for all you do.....I owe you alot of beer money right now....It may turn into a keg!!!!

 

Regards,

i'll try to figure out a spot on where i could put the tripcomp when navigating

one question,did you change the device type of your sys.txt to the one specific to F500?

yeah....... it wont work at all without sys.txt revision for F500BT....... forgot during one of my installs..

I did notice on page 3 of the "GURJON SKIN FOR AVIC" thread this post by SPECTER;

"If you are using an F500BT with the optional amplifier, you will be happy to know that the sound will go through the amplifier and not just the units little speaker."

so this is fixable somehow

I know this sound output thing is apparently F500BT specific, but I notice the "exceeding speed limit" warning audio does indeed mute the HU and annouce over the speakers. Why does this announce correctly, but the "red light camera" warnings do not. They still only announce on the avic itself, forcing me to leave the audio output to "both" and still cant be heard over even moderate volume HU music.

 

PLEASE HELP WITH THIS. The routing of the audio output must be adjustable via code..

 

I love this friggin IDT interface, looks like I have to pay for this 3.0v3 upgrade also...

one question,did you change the device type of your sys.txt to the one specific to F500?

yeah....... it wont work at all without sys.txt revision for F500BT....... forgot during one of my installs..

 

I did notice on page 3 of the "GURJON SKIN FOR AVIC" thread this post by SPECTER;

"If you are using an F500BT with the optional amplifier, you will be happy to know that the sound will go through the amplifier and not just the units little speaker."

 

so this is fixable somehow

 

I know this sound output thing is apparently F500BT specific, but I notice the "exceeding speed limit" warning audio does indeed mute the HU and annouce over the speakers. Why does this announce correctly, but the "red light camera" warnings do not. They still only announce on the avic itself, forcing me to leave the audio output to "both" and still cant be heard over even moderate volume HU music.

 

PLEASE HELP WITH THIS. The routing of the audio output must be adjustable via code..

 

I love this friggin IDT interface, looks like I have to pay for this 3.0v3 upgrade also...

i wish i have an F500 so i personally could try it out, i'll dig into the gurjon skin and see what i come up with,

69sixpackbee,

That did the trick. Thanks so much for the help. I really appreciate it.

Regards,

You are very welcome!

69sixpackbee,

 

That did the trick. Thanks so much for the help. I really appreciate it.

 

Regards,

got it fixed, thanks for pointing it out,

N.P

IDT

Can you post code fixing dist/time window not showing up in "go home" mode? (I`m running IDT3.0v1)

thanks

IDT

Can you post code fixing dist/time window not showing up in "go home" mode? (I`m running IDT3.0v1)

thanks

go to start.ui, search for sc_ReturnHome and add this line before the end of the script

ui_RouteinfoBackground.show

IDT

Can you post code fixing dist/time window not showing up in "go home" mode? (I`m running IDT3.0v1)

thanks

 

go to start.ui, search for sc_ReturnHome and add this line before the end of the script

ui_RouteinfoBackground.show

thanks

I had some odd behavior this morning on the ride in to work with 3.1. all was fine until I got on the highway, and then as soon as the first Highway Sign for teh next exit showed up, the map automatically switched to 2D view. and even cycling through with the 3D/2D/2Dn button, I couldn't get 3d mode back until I exited the highway.

but - I did forget to flush the user data files before I went from IDT v3.0 to v3.1. I flushed them before I got out of the car when I got to work, but that was int he garage with no GPS signal.

Any idea why it would do that, and should I expect it to keep doing that now that I've cleared the user data?

IDT

Can you post code fixing dist/time window not showing up in "go home" mode? (I`m running IDT3.0v1)

thanks

 

go to start.ui, search for sc_ReturnHome and add this line before the end of the script

ui_RouteinfoBackground.show

thanks a lot, I got this working

I was trying to put comp trip to v1 from v3 but everytime I got errors, can you help me to get this right,

can you take look at my datatrip.zip file and fixed for me or just put comp trip mod in to my last working data.zip ?

I would owe you big time

here is a link with files

http://webpages.charter.net/torez22

I had some odd behavior this morning on the ride in to work with 3.1. all was fine until I got on the highway, and then as soon as the first Highway Sign for teh next exit showed up, the map automatically switched to 2D view. and even cycling through with the 3D/2D/2Dn button, I couldn't get 3d mode back until I exited the highway.

 

but - I did forget to flush the user data files before I went from IDT v3.0 to v3.1. I flushed them before I got out of the car when I got to work, but that was int he garage with no GPS signal.

 

Any idea why it would do that, and should I expect it to keep doing that now that I've cleared the user data?

that shouldn't be doing that, check if that happens again and let me know

IDT

Can you post code fixing dist/time window not showing up in "go home" mode? (I`m running IDT3.0v1)

thanks

 

go to start.ui, search for sc_ReturnHome and add this line before the end of the script

ui_RouteinfoBackground.show

 

 

thanks a lot, I got this working

I was trying to put comp trip to v1 from v3 but everytime I got errors, can you help me to get this right,

can you take look at my datatrip.zip file and fixed for me or just put comp trip mod in to my last working data.zip ?

I would owe you big time

here is a link with files

http://webpages.charter.net/torez22

i'll take a look at it

thanks a lot, I got this working

I was trying to put comp trip to v1 from v3 but everytime I got errors, can you help me to get this right,

can you take look at my datatrip.zip file and fixed for me or just put comp trip mod in to my last working data.zip ?

I would owe you big time

here is a link with files

http://webpages.charter.net/torez22

i'll take a look at it

great one more thing I wanna get to trip comp by pressing curent street

I have no problems download from http://webpages.charter.net/torez22/

but if so go to ftp://webpages.charter.net/

user name: torez22

pass: ironmaiden

I also can not get the trip computer to start - the only field that updates is the speed. Immediately after installing the mod, I went to the trip computers and all 3 had data, so I reset them. Now I can't get them to start. Any ideas?

Jim