Has anyone succesfully transferred their address book from their Nokia N95 Smartphone? I can pair the 2 succesfully and I can direct dial from the D3 but I can not tranfer my phonebook from the N95. I've checked on the internet in numerous websites including this forum but can not find anything with this configuration. The N95 is fully unlocked but I am using the AT&T/Cingular Network.

If the phone doesn't support OBJECT PUSH PROFILE then the answer is no.

Hey guys, there is a app out known as Jetware Mobile. It adds the functionality missing from most Treo 700w/p and Cingular 8125 making it able to communicate with the D3 also adds the ability for you to upload your contacts so they do appear on the D3 screen. Being using this now for I've used this app with a Treo 700p a Verizon 6700 and currently using it with my new HTC Mogul on from Sprint .

Hey guys, there is a app out known as Jetware Mobile. It adds the functionality missing from most Treo 700w/p and Cingular 8125 making it able to communicate with the D3 also adds the ability for you to upload your contacts so they do appear on the D3 screen. Being using this now for I've used this app with a Treo 700p a Verizon 6700 and currently using it with my new HTC Mogul on from Sprint .

Wish they made an APP that works with Palm's operating system and not just Windows Mobile....

Ugh! I can't get my new Centro to pair for nothing!

All:

Thor and I are both having the issue about not hearing the voice dial PROMPTS from a Bluetooth-capable phone once voice dialing is activated. However, I've been able to get my entire address book transferred in one swoop. No problem there.

- A

Has anyone succesfully transferred their address book from their Nokia N95 Smartphone? I can pair the 2 succesfully and I can direct dial from the D3 but I can not tranfer my phonebook from the N95. I've checked on the internet in numerous websites including this forum but can not find anything with this configuration. The N95 is fully unlocked but I am using the AT&T/Cingular Network.

Hey mikee_lykes_it!

Well, I just did it. It actually disconnects when you ask for the "transfer phonebook" from the D3. THEN, from your N95, go to the contacts, select all, synchronize through bluetooth (you'll see the pioneer unit as a choice), when you confirm, you'll see the transfer going on on the D3 until it says "complete".

Good luck!

anyone have success with the verizon pearl???

I did solve the problem but the solution was weird.

 

Thinking I had a defective BT head and having Pioneer support confirming it, I purchased another. Same problem!! This made no sense! It connects but no sound, only static. What are the chances of having 2 bad units? Then, by mistake, I plugged in the bus cable intro the wrong socket (instructions say, blue end to blue socket) and it WORKS! What is this? In fact both units worked and not only did it connect as before but now I had sound. Pioneer support confirms that some have been assembled incorrectly!

 

I can barely beleive this!

 

Any one else run into this? BTW, I was unimpressed with Pioneer support.

sounds to me like you have something setup wrong in the first place... i couldnt get my plugs to hook up incorrectly as youve stated and had ZERO issues pairing a MR 1.08 Palm Treo 700p to my avic d3... sound is perfect and im able to push my phonebook

as far as i know the MR1.10 has a different bluetooth stack which the newer models use... i havent found a single newer palm treo that would pair with my avic d3

I just talked to a Pioneer customer service rep., and he says that Pioneer is working on a "fix" for the Smartphone/PDA interoperability with the CD-BTB200. He wasn't sure how long a fix might take, but his comment was: "Our engineers are aware that this is a problem with Palm and Blackberry devices. We're trying to get a firmware update that should address the fact that those phones don't sync up with our product that well."

 

Here's hoping the engineers are reading this thread and are working hard for a fix...

I called and they stated it's normal and No work in progress. I have an avic z1 with Bt but my phone does pair up well but my issues are sometimes the unit will ack like it's on a call and over ride the navi to the point I have to reset it. Pioneer have stated there are some slight issues but No fireware in store yet.

I have been able to get my Palm Treo 700wx to connect...it took a lot of tries. However the quality of the microphone is bad. People on the other end of my calls constantly complain they cannot understand me. It could be the phone...I know the treo's have serious BT issues. But it certainly does connect...and it does autoconnect each time I get into the jeep.

I have a verizon 700wx and was running the trial version of jetware. I could make calls on my avic but then the trial expired. I bought the full version and upgraded and now I can not get the 2 to pair. I deleted the partnership and have tried to pair again but I put the 0000 in but it does not take. Any recommendation.

Stop me if this has been covered, but im stumped.

I have the AVIC-D3 and the CD-BTB200 Bluetooth set-up and a Blackberry Curve 8310.

Ok here is what I have working. Great voice activated phone calls, a little echo but still good, hang up and pickup options on the AVIC.

What I dont have is call from the AVIC available, I cant register the phone and I cant transfer the phonebook (blackberry says "Unable to locate push server, consult CD-BTB200 bluetooth hands free manual" ok the Bluetooth set-up doesnt mention these problems.

It does say register it would help in other threads.

Options i have under phone FUNCTION (NONE) the button isnt even lite, so I cant register since thats where the manual says you do it from. I have a function button lite under the MUSIC from the Blackberry but no option really to do with the phone or registration.

PLEASE HELP ME!