EDITED: mine PIONEER AVIC-F9220BT was successfull updated!

So next topic are how u can do it.

UPDATE MAP 2015 TESTED ON F9220BT

download here: https://mega.nz/#F!BJ43AQCD!T8eXW0zdXSpv5FGHo_V0pA 

2015_European_Map_Updat (2.95GB)

"cardinfo.cif"

"verinfo.dat"

unpack it with password: http://pastebin.com/y2cCdzrE

Now go in folder 2015_European_Map...../.../SD drive/  

and put there CARDINFO.CIF file and replace old one

next go on ..../../SD drive/UPDATE folder

and put there VERINFO.DAT file and replace old one

UPDATE ARE READY FOR PUT IN SD CARD!!!!!!!!! (This are way for AVIC-F9220BT only!!!)

Now FORMAT ur SD CARD: FAT32 and 16kB!!!

after Format SD put there all from SD drive FOLDER.

Now ready for update ur PIONEER AVIC:

put SD CARD in RADIO and turn ur RADIO ON, after starting RADIO give u question if u will UPDATE SYSTEM(press OK)

Now Question SYSTEM WILL BE RESTARTED(press OK)

after RESTART will u see updating and 30min till end, and after 1min will be 22min. When will be 100% it will restart system and continue with 6/6 small updates system files.

And if all completed, AVIC do restart and wellcome u new version of ur system and maps. Now u volte ur languange and voice language.

THAT ARE ALL AND U NOW HAVE 2015 MAPS!!!

FOR 

dont need put there new CARDINFO and VERINFO

BUT THIS DONT TESTED!!!!!!

archive is corrupt, can you do reupload, please

Hi,

Mega ask for a decryption key. I tries the pastebin data as password, but fails.

Thanks in advance

any news about this password for access Mega download?

any news about this password for access Mega download?

With application for android you can download the archive, but it is broken.

can you do reupload, please

Instructions to update AVIC-F10/F20/F920/F9210/F9220BT (working links as of now)

1. Download file: 2015_European_Map_Updat_for_Pioneer.zip from here (3 GB download including all Europe latest maps).
2. ZIP is password protected. Extract the contents with the password seen here
3. Move all files to the root of a freshly formatted SD card (4 GB or larger required)
4. Replace CARDINFO.CIF with this version
5. Replace UPDATE\VERINFO.DAT with this version
6. Insert SD Card in your Pioneer, follow instructions (~30 minutes with progress bar - DO NOT INTERRUPT OR POWER OFF)
7. After reboot go to Bluetooth settings and update bluetooth firmware separately (~5 minutes with no progress bar, just wait until finished - DO NOT INTERRUPT OR POWER OFF)
8. Confirm update by looking at software version (6.0000) & Bluetooth firmware version (3.32).
9. Remove SD card, go for a test drive and check everything is OK including fresh maps, latest points of interest and text-to-speech (TTS)
10. Add additional TTS (text-to-speech support) only if your language does not already exist. Use these files: CZC (Czech), DAD (Danish),  DUB (Flemish),  DUN (Dutch),  ENG (UK English),  FIF (Finnish),  FRF (French),  GED (German),  GRG (Greek),  HUH (Hungarian),  ITI (Italian),  NON (Norwegian),  PLP (Polish),  PTP (Portuguese),  ROR (Romanian),  SPE (Spanish),  SWS (Swedish),  TRT (Turkish). Add them to another SD card (or format the previous one) and follow instructions from manual. The SD's top level folder must be named VOICE or TTS and it should contain only the folders/languages you need to add.

Good luck, tested and 100% successful on AVIC-F10BT with English, French, Italian, Spanish & Greek TTS installed.

Instructions to update AVIC-F10/F20/F920/F9210/F9220BT (working links as of now)

1. Download file: 2015_European_Map_Updat_for_Pioneer.zip from here
2. Extract contents with password seen here
3. Move all files to the root of a freshly formatted SD card (4 GB or larger required)
4. Replace CARDINFO.CIF with this version
5. Replace UPDATE\VERINFO.DAT with this version
6. Insert SD Card in your Pioneer, follow instructions (~30 minutes with progress bar - DO NOT INTERRUPT OR POWER OFF)
7. After reboot go to Bluetooth settings and update bluetooth firmware separately (~5 minutes with no progress bar, just wait until finished - DO NOT INTERRUPT OR POWER OFF)
8. Confirm update by looking at software version (6.0000) & Bluetooth firmware version (3.32). Also check maps, POIs and languages (2015 HERE). 
9. Add additional TTS (text-to-speech support) only if your language does not already exist. Use these files: CZC (Czech), DAD (Danish),  DUB (Flemish),  DUN (Dutch),  ENG (UK English),  FIF (Finnish),  FRF (French),  GED (German),  GRG (Greek),  HUH (Hungarian),  ITI (Italian),  NON (Norwegian),  PLP (Polish),  PTP (Portuguese),  ROR (Romanian),  SPE (Spanish),  SWS (Swedish),  TRT (Turkish). Add them to another SD card (or format the previous one) and follow instructions from manual. The SD's top level folder must be named VOICE or TTS and it should contain only the folders/languages you need to add.

Good luck, tested and 100% successful on AVIC-F10BT with English, French, Italian, Spanish & Greek TTS installed.

Hi Ayan!

Please upload or send to me the UPDATE\VERINFO.DAT because it don't available on download location. I have az AVIC-F10BT.

Thank You!

Zoltan

Hi Ayan!

 

Please upload or send to me the UPDATE\VERINFO.DAT because it don't available on download location. I have az AVIC-F10BT.

 

Thank You!

Zoltan

 

 

I was looking for this file also

Hi Ayan!

 

Please upload or send to me the UPDATE\VERINFO.DAT because it don't available on download location. I have az AVIC-F10BT.

 

Thank You!

Zoltan

Hey Ayan! Me too! would be super awesome if you could upload those files again...the ones in the 2016 post dont seem to work...very much appreciated if you could upload THANK YOU!! cheers, Dex

Finally!

Thanks for the update for my f9220bt

It works!

Hi guys, find replacement files here: CARDINFO.CIF and UPDATE\VERINFO.DAT. I have also updated the Feb 2017 post, so the missing links are working again.

Hi guys, find replacement files here: CARDINFO.CIF and UPDATE\VERINFO.DAT. I have also updated the Feb 2017 post, so the missing links are working again.

Will this update work also for avic-f9210bt?

Hi!

If you have AVIC-F9210BT as I do, do not change  CARDINFO.CIF and VERINFO.DAT files, leave them as they are in the archive. 

Everything except that worked as a charm for my AVIC-F9210BT. 

Is there any way to update maps to 2017 version?

Thank you in advance!

Hi Community,

i`m new to the forum and i also have a question.

If i want to update a F20BT, is this the right software:

2015_European_Map_Update (2,95GB)

Does the "cardinfo.cif" and the "verinfo.data" have to be changed or is this not necassary with the F20BT?

Thank you and have a nice day!

Kindest regards

Hi,

I followed the instructions. But my F9210bt doesn't ask for an update. Its not installing.Do I have to install the Firmware first (Vers. 2.00000 to Vers. 2.0030)?

Hi,

 

I followed the instructions. But my F9210bt doesn't ask for an update. Its not installing.Do I have to install the Firmware first (Vers. 2.00000 to Vers. 2.0030)?

I fixed it and it works. I had to replace cardinfo and verinfo although it is a fb9120bt!! Weird! But thx a lot.

@ayan,

to community,

an Avic-f10bt successfully updated following the Feb 2017 post.

Thank you!

Just a note to all: The February update enables AHA Radio (even in F10BT where it is not normally supported). You need to download the app on your mobile phone, connect via bluetooth or cable and push the AHA radio button which is now visible as a media option.

My f10bt does nothing when I insert the sd card, what should I do?

Instructions to update AVIC-F10/F20/F920/F9210/F9220BT (working links as of now)

1. Download file: 2015_European_Map_Updat_for_Pioneer.zip from here (3 GB download including all Europe latest maps).
2. ZIP is password protected. Extract the contents with the password seen here
3. Move all files to the root of a freshly formatted SD card (4 GB or larger required)
4. Replace CARDINFO.CIF with this version
5. Replace UPDATE\VERINFO.DAT with this version
6. Insert SD Card in your Pioneer, follow instructions (~30 minutes with progress bar - DO NOT INTERRUPT OR POWER OFF)
7. After reboot go to Bluetooth settings and update bluetooth firmware separately (~5 minutes with no progress bar, just wait until finished - DO NOT INTERRUPT OR POWER OFF)
8. Confirm update by looking at software version (6.0000) & Bluetooth firmware version (3.32).
9. Remove SD card, go for a test drive and check everything is OK including fresh maps, latest points of interest and text-to-speech (TTS)
10. Add additional TTS (text-to-speech support) only if your language does not already exist. Use these files: CZC (Czech), DAD (Danish),  DUB (Flemish),  DUN (Dutch),  ENG (UK English),  FIF (Finnish),  FRF (French),  GED (German),  GRG (Greek),  HUH (Hungarian),  ITI (Italian),  NON (Norwegian),  PLP (Polish),  PTP (Portuguese),  ROR (Romanian),  SPE (Spanish),  SWS (Swedish),  TRT (Turkish). Add them to another SD card (or format the previous one) and follow instructions from manual. The SD's top level folder must be named VOICE or TTS and it should contain only the folders/languages you need to add.

Good luck, tested and 100% successful on AVIC-F10BT with English, French, Italian, Spanish & Greek TTS installed.

Hello,

just updated my AVIC-F20BT with this tutorial.  Works flawlessly

I did not have to change the 2 files.

Just works with the update file provided.

Is there a chance to obtain the 2017 version?

The only thing is that to bluetooth version is 3.24... 

Thanks in advance!

Instructions to update AVIC-F10/F20/F920/F9210/F9220BT (working links as of now)

1. Download file: 2015_European_Map_Updat_for_Pioneer.zip from here (3 GB download including all Europe latest maps).
2. ZIP is password protected. Extract the contents with the password seen here
3. Move all files to the root of a freshly formatted SD card (4 GB or larger required)
4. Replace CARDINFO.CIF with this version
5. Replace UPDATE\VERINFO.DAT with this version
6. Insert SD Card in your Pioneer, follow instructions (~30 minutes with progress bar - DO NOT INTERRUPT OR POWER OFF)
7. After reboot go to Bluetooth settings and update bluetooth firmware separately (~5 minutes with no progress bar, just wait until finished - DO NOT INTERRUPT OR POWER OFF)
8. Confirm update by looking at software version (6.0000) & Bluetooth firmware version (3.32).
9. Remove SD card, go for a test drive and check everything is OK including fresh maps, latest points of interest and text-to-speech (TTS)
10. Add additional TTS (text-to-speech support) only if your language does not already exist. Use these files: CZC (Czech), DAD (Danish),  DUB (Flemish),  DUN (Dutch),  ENG (UK English),  FIF (Finnish),  FRF (French),  GED (German),  GRG (Greek),  HUH (Hungarian),  ITI (Italian),  NON (Norwegian),  PLP (Polish),  PTP (Portuguese),  ROR (Romanian),  SPE (Spanish),  SWS (Swedish),  TRT (Turkish). Add them to another SD card (or format the previous one) and follow instructions from manual. The SD's top level folder must be named VOICE or TTS and it should contain only the folders/languages you need to add.

Good luck, tested and 100% successful on AVIC-F10BT with English, French, Italian, Spanish & Greek TTS installed.

Thank you very much!!

Installed on F9220BT and working.

Now looking for 2017 update

Does this update also work voor the F30BT?