bigman411

i got it professionally installed. i actually just came back and he was showing me behind the unit. that pink wire was crimped down good in that little cylinder tube. the wire wasnt moving anywhere. where is the source of tap? the pink wire that goes from radio harness to the source. it was secure.

i have the same problem with the front passenger speaker coming on and off if i go over bumps sometimes or make a sharp right turn. the speaker will just cut out, but if i turn up the volume up and up it will come back on. winter time/cold is worse with speaker turning on and off. no idea. everything is securely connected. it might be the HU harness

so i just got that speaker converter blue box replaced. he couldnt find any reason why its shutting off besides the harness to the unit. that one that plugs into the z1. that was for the front right speaker issue turning on and off. we see how it goes. everything works fine right now and the speed pulse is working again. i hope it doesnt shut off again. that pink wire was connected and secured. so i dont know why it keeps going on and off. he said it could be the actual harness from the pioneer unit. do you know how much those are to get it replaced?

i cant believe i got to open up my center console again. ive opened it like 10 times to try and fix the connection. i have to connect the pink speed pulse wire again. it is reading 0 sometimes and if i bang the side enough times, it comes back on. sometimes when i start the headunit, it will just come on and work fine. its wierd.

do you think maybe its because of the cold? it seemed like it is happening more because of the cold. Thats means i have to remove whole center console and check that pink wire!! how come if i bang the side it sometimes just comes back on speed pulse

sometimes when i start up my navi right away when i drive the car, it will not move until like 5 min later. my speed pulse is not going up and down with the bars under connection status. wierd thing sometimes it works and sometimes it doesnt. if i bang the center console on the side the speed pulse will come back on.

ok i got it to work i used disk director to make the partitions then true image home to mount the images. Now that i thought of it i should of removed the copyright text on boot up. Well now its too late, my drive is already locked. so when its locked and i take it out. Acronic true image cant not read the partitions because its locked? What is the pw that pioneer gives the HD? i dont understand the whole process why you have to pay like $50 to get a key

problem after problem, im trying to image all 4 partitions and when i get to the 3rd one i move the partition size over and make it 37 gb so just enough space to put the 4th one on, but it keeps going back to 9.307 GB when i go to finish. im using acronis

its not there i messed up and deleted it. so i got to download it again. anyway if i forget the security support thing and i image the drive. does that mean the next update for maps the drive will already be locked once it goes into that Z unit and i will have to get it unlocked and pay $50 to save my music?

woww this makes my day i was playing around with acronis true image and i wanted to redo and start over so i deleted the backup thinking it was just on the software and i deleted the whole z3 image!!! how do i get the files back omg

this is what it says calculating new checksum... writing changes to the drive device error.

if this is any help the magic boot in MS DOS. i am going through the setting through the C:/MHDD. Its not through A:/MHDD. Thats a bad file name or incorrect command.

can i choose that option in MHDD unlocking?

it shows the drive is unlocked. i have no idea why am i getting a device error right below when it says reading or writing change sum. i didnt get it before when i had the 40gb.

its not locked, this is wierd i dont know why i cant change the security