tex93051

@RonS - not meaning to high jack this thread but you really seemed to be knowledgeable - Can you take a look at this thread and see if you have any ideas? I have researched hi and lo and have not found a path - tech support is useless (as expected). It seems to be a software hick-up so I was hoping I could get it fixed with a little help. check out the video I took of the issue. Hope you can check it out. Cheers P.

http://avic411.com/index.php?/topic/38453-z140bh-in-a-select-program-language-loop/?hl=loop

Hi misterwoofwoof,

just tried your new cardinfo.cif file on a z140BH (not BT) assume it is the same. Sadly it didn't work. However, My HU has an issue that might be the reason it isn't working. check out this post here to understand what it does. 

http://avic411.com/index.php?/topic/38453-z140bh-in-a-select-program-language-loop/?hl=loop

cheers P. 

I know got a video along with the description - http://youtu.be/ypFMC964k_U

can anyone tell me how I get get this fixed? Please?

Cheers Patrick

Hi all, 

I have an issue with my HU and I do not know what to do to resolve it. 

here is what happens:

- HU start-up and goes into a screen asking to "select program language" - if I press any language (or any option) the unit simply reboots to the same window. 

What I tried so far

- hard reset by disconnecting the battery - didn't resolve the issue

- updated to the latest firmware (8.05) - process completed seemingly but I the after the ucom update the HU never rebooted by itself. When I force the restart it shows 8.05 but when I reboot w/o SD card it goes back to the "select program language" screen and the old loop. So I can't verify if the update actually worked. 

Any ideas?