jbsengineer
Members-
Content Count
20 -
Joined
-
Last visited
About jbsengineer
-
Rank
Member
-
Yesterday it started getting really bad reception. Almost a constant "Acquiring Signal." This morning it worked for about 10 minutes then cut out back to "Acq Signal". If it is bad is there a better replacement for it? Or should I just find a New one somewhere since they are discontinued? Thanks.
-
no sound to headuint from bluetooth
jbsengineer replied to cycon82's topic in Problems/Troubleshooting
This will happen if your IPBus connection is backwards. Make sure the OUT is going to the Avic -
LCD has light waves moving across it...
jbsengineer replied to jbsengineer's topic in Problems/Troubleshooting
The illumination wire in the harness does not work. According to some people in the Trailvoy forums the headlight switch will not contain the wire I need as well. Apparently I can either tap into a brown wire under the dash which is very hard to find or a parking light wire. The brown wire is in the middle of a 50 wire harness and there are another 8-10 browns. -
LCD has light waves moving across it...
jbsengineer replied to jbsengineer's topic in Problems/Troubleshooting
I haven't grounded it to the chassis. Hopefully that is the issue. I will do that when i get the parking light wire routed through the firewall. -
When my Trailblazer engine is running I get like light vertical waves moving accross the screen, very easy to see on a static image. Kind of looks like the effect you get when a power cord is too close to a monitor. When the engine is off they dissapear. It look horrendous if there is a one color background. Any ideas?
-
Installed BT now I'm getting "excessive vibration"
jbsengineer replied to jbsengineer's topic in Problems/Troubleshooting
I will give it some time. But just in case how can you reset 3D calibration settings? -
Installed BT now I'm getting "excessive vibration"
jbsengineer replied to jbsengineer's topic in Problems/Troubleshooting
2007 Trailblazer. I haven't noticed this at all in the past week or so. Even did a 500 mile trip and nothing. -
Installed the bluetooth adapter last night. This did require me to take the D3 out of the dash etc. Now when I checked the connection status I'm getting a "Excessive Vibration" reading. Is this because I tipped the D3 all around when I removed it out of the dash and reinstalled it etc. The 3D calibration did not lose it's settings. It's mounted the exact same way before I took it out. Nothing has changed. Would resetting the 3D calibration memory fix this? Thanks.
-
Basic wiring for the Avic-D3 and it's extras...
jbsengineer replied to jbsengineer's topic in General
The BTB200. -
Basic wiring for the Avic-D3 and it's extras...
jbsengineer replied to jbsengineer's topic in General
Got the BT adapter in today and it needs a power connect. It doesn't get power from the IP Bus. -
Great idea. I'll just setup Smartlists to narrow down the Artists etc. Such as "Artists A-D" Thanks Hifi. Guess I wasn't thinking outside the box!
-
Is there a problem with tapping into the 12 memory wire coming from the factory harness for all of the extras like Sirius, bluetooth etc? Would it be to much draw? Also do the Sirius tuner and the Bluetooth box need the memory wire or the switched wire?
-
I was referring to the iPod interface. I guess I'll have to live with scrolling through alphabetically. thanks!
-
Oh my does this take a long time. Is there a better way to look through songs, artists, albums etc other than just the down-down button?