bird333

Is the mute/attenuation setting only related to the phone? I set it to attenuation and when I press and hold the volume button it still only does 'mute'. Also is entering the 'PIN Code' only related to bluetooth? This button is greyed out for me. I just wasn't quite clear on these from the manual. Finally, is there a way to make the mute kick in faster? Presently you have to hold it for like 1-2 sec before it mutes.

It was a defective unit. Thanks for the help.

I checked the antenna cable, it seems fine. It works fine with the stock radio I took out.

No, I meant if I used the blue/white cable for the antenna could I also use it to turn on two amps? I assume you mean the big black antenna cable. I will double check it. The guy in the other thread seemed to have success with the blue/white cable??

Ok, I hooked up the blue wire but it didn't change anything. Reading in this thread http://avic411.com/forum/viewtopic.php?t=12834 it seems I should hook up the blue/white wire to the antenna. Is this correct? The Avic-N4 install guide seems contridictory. For the blue/white wire it says 'Do not connect this lead to auto-antenna control terminal' for the blue wire it says, 'If vehicle has glass antenna, connect to the antenna booster power control terminal' Also, I plan on running two amps. If I connect the blue/white wire to the antenna, do I just split off this wire for the remote turn

I can't seem to enter this menu. I get to "please push reset button†step. How do you enter the password? Do you have to have a remote for this?

I just installed a N-4 and I don't get any audio from ANY radio stations. The signal seems to be coming in (i.e. the word 'stereo' shows up). I did the video bypass. I didn't connect the blue power antenna wire because my antenna is built into the rear window. I played a CD and I can hear it fine (well one speaker is not playing but that is probably a bad connection). Car '96 Honda Accord Any ideas? Thanks!

Can you turn on RDS? That's what I want to know.