jdmchris

got it put in. Bypass wasnt working so I have to go back and make sure everything is right. Does it matter if I ground the wires to the chassis or to the harness wire? I have the ground, Parking brake and mute wire all grounded to the chasis.

it didnt come with a diagram. I looked and seen the light gray writing, but some of the wires dont say anything on them.

Ok so I wired up the headunit harness to my scosche kit harness... on the headunit harness I have the Blue wire(antenna control), purple (reverse gear signal) which goes to the rear taillight, pink(speed signal input), black(ground) which is obvious, and the blue/white(system remote control) On the scosche harness I have black(ground), pink(says TEL MUTE), black/white(doesnt say anything), brown(doesnt say anything), orange/black(dimmer ground), green/white(doesnt say anything). Do i hook up speed signal input to the pink on the scosche? or does that need to be connected to

Sometimes those quick tap connections dont puncture the insulation all the way. That may be why it isnt working. Make sure all connections are connected properly.

the white connector, is that the one that comes with the headunit? OEM harness? Or stereo kit harness? I have a black harness that came with the headunit, and the black harness that came with the dash kit. Im installing this weekend and need to see if my unit is missing a harness. *EDIT* Nevermind... The harness was hiding. I swapped the wire and cant wait to install it this weekend!