Maverickster

You're kidding, right? I tend to agree that too many good threads get diverted to the bypass discussion, but let's be honest, that's what 99% of the people come here for. Let's also be honest that you, of all people, should be the last one throwing stones at "noobs" for not knowing enough. Correct me if I'm wrong, but you're the originator of this little gem, right: http://www.avic411.com/forum/viewtopic.php?t=19923 ...but, I digress. --Mav

I don't believe this is accurate. My experience is telling me that if you have two phones paired and both are set to auto-connect, then, if both phones are present at startup, it will auto-connect with the last one it was connected with. At least, this has been my experience. For example (based not so loosely on my setup): Paired 1st; in 1st Position: Verizon Motorola Razr v3c (with correct firmware for OBEX) set to auto connect. Paired 2nd; in 2nd Position: AT&T RIM BlackBerry 8800 set to auto connect. What I would like: If only one phone is in the car, auto connect to th

Can you do one with a 2003 Envoy XL SLT in the background rather than the Denali? That would be awesome. thanks. --Mav

I try not to be one of those guys that says, "do a search", so I'm going to give you a link to two helpful threads. http://www.avic411.com/forum/viewtopic. ... ht=#132983 http://www.avic411.com/forum/viewtopic. ... sc&start=0 But there's more out there. Really, do a search.

Link to my Data.zip file was added to the first post in this thread. Enjoy!

Pretty sure it uses SSD now...at least, I don't recall having seen a HDD when someone posted pictures of it taken apart. --Mav

Sure. I'll try to do it this evening when I get home. As for visuals, although fuzzy, pictures of the setup and each hack are in the first post. --Mav

See pictures in first post: http://www.avic411.com/forum/viewtopic.php?t=19689

Well, I'd be even happier if someone who knows this programming thing better than us can answer how to move it. It's driving me nuts.

The pieces I lifted out of them are. Granted, I didn't take there data.zips wholesale, but the components I "borrowed" work fine. --Mav

Curious timing. I just answered that for another guy in Keeper's thread. I haven't tried it, but this should work: ;compass As I told the other guy, this might be overkill (i.e. you might just need to add the alternative sprite to the first one), but this should do it from a belts and suspenders perspective. EDITED TO UPDATE TO CODE THAT JNEILAN CONFIRMS WORKS WITH LINEAR COMPASS.

See the instructions for the "Compass/Detour Mod" in this thread (it's the 3rd or 4th post): http://www.avic411.com/forum/viewtopic.php?t=19864 I did look at this, but with the data.zip file from keeper, I do not see that line, as he put in a custom compass (which rocks!!) O.K., but you should easily be able to add this function to Keeper's compass as well. Looking at his modified compass, this should be pretty easy. Just replace his code with the following: ;compass That may be overkill (you might only have to add the alternative commands to the first spri

Actually, I just copied and pasted your script from the post. So I think the script should be ok but I will double check again. I do have hardware bypass. Can you tell me what is safety mode does? I tried to search but did not find any explanation, only saw them in sample scripts. Thanks again, Mav. Don't know. I think it is the flag that tells the software what it can and can't do when the car is in drive, but I don't know that for sure. But, if you have the hardware bypass, it shouldn't be relevant. Nevertheless, you might want to try it with it set to 0 and if that doe

Hey Mav, What did I do wrong? I put this script into my DATA.ZIP, run it. It started without the green button. Then after I put in a route, the green and red button show up overlapping. Then if I press the button, it turn into red and the stop route show up. If I press cancel in the stop routing screen, button became red. If I press ok in the stop routing screen, all both buttons are gone again. Don't know. Works fine for me. Sounds like something is wrong with the "visible model" switch of the Green Button. The Red Button appears to we working correctly, so we'll leave t

See the instructions for the "Compass/Detour Mod" in this thread (it's the 3rd or 4th post): http://www.avic411.com/forum/viewtopic.php?t=19864

You can move it on the X axis. I moved both buttons to separate positions on the X axis. Problem is you can't move it on the Y. This just doesn't make any sense. I hope someone with some more knowledge about this stuff than we have is able to weigh in. I really need to be able to move it. I really want to know how people are dealing with this thing. Can't move it and if you comment it out it throws a bunch of errors. --Mav

I think it might have something to do with this (the first line of code in the first layer in the navigatemap_800_480.ui file): Anyone know what it does? --Mav

No matter what I try in the navigatemap_800_600.ui file, I cannot get the "Map Confirmation Button" to move on the Y axis. Anybody know what's going on and how I can get it moved? The button I'm talking about is the second one down on the right in this picture (below the 3D/2D toggle): I believe the code is this: Any light you can shed on this would be greatly appreciated! Thanks. --Mav

What a choice of words... --Mav

I've posted this in earlier threads, "WinMerge" is a great/easy/free way to compare the diffreences in 2 txt files. Can't help on a quick and easy way to compare the (Data.zip) files though. ?? Ol' Emanuel is all I've got. Yeah, I've got DeltaView at work to do that part with...it's the "other changes" that can be problematic to chase down (and if you miss a random semi-colon in a random file somewhere it could not work). Thanks though. That's a good tip! --Mav

I had the same problem. That's exactly why I did it this way. Incidentally, I was reading in a thread that is now several months old a suggestion that the Mods (as in Moderators) wanted hacks posted to individual "How To" threads. If a Mod would like to parse this thread into 5 separate "How To" threads (or if s/he would like me to do that), go ahead or let me know. Thanks! --Mav

If you follow the instructions found here, then no, it won't conflict: http://www.avic411.com/forum/viewtopic.php?t=18624 Only problem is that if you use all of my hacks, you'll have to find somewhere else to put the Mute button since pretty much the entire X=720 column is taken. Shouldn't be too tough. Just play around with the X and Y coordinates until you find a place you like. Or, alternatively, use the clock as the button. This also shouldn't be too tough, but will require something of a working knowledge of how the code works. Good luck! --Mav

If you do that, let me know if you find a place to put it without increasing "screen clutter". Note that the clock does not currently have anything assigned to it, so that might be a good place.

Reserved.

Reserved.