drex

If using a higher capacity SD card or running an HD works, why not just simply state that? And if it does, I'd image it might take a while to load if you have something like 5000 files?

Check with Pioneer's CD ROM manual again and at the end you'll see that USB is limited to only a capacity of 2GB. SD is limited to 8GB. I haven't experimented with higher capacity SD or USB keys yet.

I should have been more specific with my details. The black ground wire from the Pioneer's black harness was connected/soldered with the light green (parking brake) and yellow/black (mute) wire and to the after market harness and then connected to my stock OEM harness. I did not tap into the black ground wire and grounded somewhere else because I assumed that the stock harness was already properly grounded. I do have a black wire which I assume it's the ground coming from the OEM HU's harness that attaches to the HU's bracket. I re-used the OEM HU bracket to mount the F700BT and it fits p

I would make sure that the ground wire has good contact with the metal frame part of the car. The HU bracket is not not welded to the metal frame and this could be the problem. I grounded my F700bt to the vehicle's ground wire for the factory HU and it worked great. Took the unit apart tonight and checked all solder connections and shrink wrap: OK. Checked hardware bypass again: the light green wire from the Pioneer black "power harness" was connected to the yellow/black stripe "mute" wire from the Pioneer RCA harness and both light green wire and the yellow/black wires were grou

I will check all soldered connection one more time and the ground wire to make sure ( I ground the ground wire to the HU bracket, is this advisable?). I'm quite careful when it comes to soldering the wires to make sure it doesn't come loose and made sure it's properly insulated to avoid shorting. Will update on whether if it's a cold solder point and/or bad grounding or just simply a bad unit. I hope it's not a defective unit as Firmware 2.0 has really grown on me and I'm really starting to like this HU and I can't wait for Firmware 3.0 if that'll happen. Anybody else with this experienc

Hi, I've been searching and could not find anything to answer the problem I have had with my touch screen. About 2 days ago, my touch screen started going crazy (it would not respond and after leaving it alone for a few minutes it'll execute the buttons which I did not push many times and very fast). Since that incident, the touch screen only works randomly. It still works but very unpredictable and seldom (very unstable). I can still hear/listen the sound/music from AM, FM radio, SD card and USB but I can not execute any of the soft buttons. This unit was purchased and installed 4 mo