tinAZ

Put everything in the APL2/IGO folder- Data.zip Extension folder BULLPEN3D.ttf SYS.TXT TAHOMA.TTF TAHOMABD.TTF Just as you see it. Do NOT extract or unzip the Data.zip file as that is the Nav mod and has to be zipped I had a small problem when Imoved the GFX file it said the file exceeded the size and it only transferred some of the files from the folder. Is there something iIshould have deleted? everything so far looks even better them I thought Abb you are a genius.

I saw it just after i posted this.

it just says DATA but inside it has an AUDIO, CONFIG, FONTS, GFX, PROJECT CONFIG, UI_IGO, UI_PIONEER folders. Not sure if i put these in a folder in my flash disc and if so where?

Just unziped the Abbs Chrome Nav Mod V1.65- AV folder and put the folder that says put in APL2-IGO Folder and there is also a zipped data file in the folder what do i do with it?

Yeah, the best one ... for me anyway. And if ever you want to change something for your liking, you can always ask Abb and he is very helpful. So I stopped looking around for the time being ... I'm in!!!!!!!! After all of this i now have to ask the question will the mod work with 3.020?

I upgraded my 900BT with the new firmware 3.020 and am no longer able to get in to testmode. I have tried several SD cards and it still won't boot up in testmode. I have been told that the key set for 3.020 is not known yet. If it is not possible to get in to testmode with 3.020 is it possible to downgrade to an earlier version and still use the updated maps?

Yeah, the Menu+Map+Eject+Reset method is to get into the eBoot Service Menu, not Testmode. If you've tried expanding Testmode 2.3 onto an SD card and you don't get any errors from the archive (typical error is a CRC32 problem on one of the .exes) and it doesn't boot to a Windows CE screen when you put the SD card in and turn on the radio, then you've likely got the unknown key file issue. You would probably have a lot more replies and help if you started your own thread in the hacks/Mods section I will do that thanks for the assistance and sorry for cutting in on this thread. I was trin

I have 3.020 US version installed. does that mean that i wont be able to get in to test mode? I saw on another post about holding the menu, map, eject and reset buttons during boot up but that seemed to be for a complete reinstall. I have tried to install the testmode on several SD cards with no luck. the cards are reconized but it still wont let me in. Is there a way to go back to 3.0 if i cant mod 3.020

Make sure you are using the correct testmode for V3 as it differs to V2. Were do i find the V3 testmode? Ive been looking everywhere with no luck.

I did the 3.0 upgrade and the hardware bypass. but now i cant get my 900bt to boot to the operating system. I had done mod to it before but now it wont let me in. Is there a trick to getting in after the 3.0 upgrade?

Just ordered a knurled black one. Thanks for the great deal!

I connected through the RCA connector on the navigation unit using the RCA outputs for Vidio/Audio. The RCA cables connect to a Audio/Video Junction box that has a Built-in 900Mhz 2-ch Transmitter for RF 2-ch Wireless Headphones. The problem is when i turn down the volume on the stero it turns down the volume going to the headphones.

I am not trying to do two things at once. I just want to cut off the speakers in the truck and let them listen with the headsets. dose it require duel zones to do that?

I did the install and Cmh928 mod 4.5.09. Newbie Friendly all-in-one hack with no issues on my F900BT but I cant find a way to cut off the car speakers so my kids can watch movies on the rear headrest monitors and listen with the wireless headsets and I don’t have to listen. Is this possible?